Hantek DPO6202B - 2-channel 200MHz oscilloscope with touch screen

Description

A digital oscilloscope is a reliable measurement tool that enables precise analysis of electrical signals. Equipped with a 7-inch color TFT LCD display with a resolution of 800 x 480 pixels, it provides a clear image and adjustable backlight brightness, which facilitates work even in changing lighting conditions. Additionally, it has a built-in touch panel that makes it easier to control the device. The oscilloscope has two measurement channels, which allows for simultaneous analysis of two signals, and impressive operating parameters, including a wide bandwidth of 200 MHz, a sampling rate of 1 GSa/s and a memory buffer with a capacity of 64M.

The oscilloscope is equipped with advanced functions that facilitate signal analysis, such as automatic setting, measurement of various voltage-time parameters, FFT analysis and waveform recording. Thanks to the USB interface, communication with a PC is also possible, which enables further data analysis and archiving of measurement results. It is a versatile tool that is used in various fields, such as telecommunications, electronics, embedded systems, scientific research and education. Its high quality and reliability make it appreciated by professionals and hobbyists around the world.

Features

Oscilloscope

• Number of channels: 2
• Sampling rate: 1GSa/s
• Input coupling: DC, AC, GND
• Input impedance: 1MΩ±2% ‖20pF±3pF
• Probe attenuation factor: 1X, 10X, 100X, 1000X
• Rated voltage: 300V CAT II
• Maximum input voltage: 300VRMS (10X)
• Horizontal:
  • Waveform interpolation: (sin x)/x
  • Maximum recording length: 64M
  • Horizontal scale range: 2ns/div~100s/div
  • Zero offset: ±0.5 div x minimum time base gear
  • Accuracy of sampling frequency and delay time: ±25ppm
• Vertical:
  • Frequency band: 200MHz
  • Rise time: 1.8 ns
  • Vertical resolution: 8 bits, each channel samples simultaneously
  • Vertical sensitivity: 500uV/div to 10V/div
  • Offset range ≥ 122mV/div, ±1V, ＜1.2mV/div ±50V
  • Bandwidth limit: 20MHz
  • FFT analysis
• Trigger:
  • Trigger type: edge, pulse width, slope, timeout, window, pattern
  • Trigger level range: ±5 divisions from the center of the screen
  • Trigger mode: auto, normal, single
  • Hold range 8ns to 10s
• Measurement
  • Voltage difference between cursors △V
  • Time difference between △T cursors
  • Reciprocal of △T, in hertz (1/△T)
  • Automatic measurement: frequency, period, average, peak-to-peak, RMS, minimum, mixmum, rise time, fall time, + width, - width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, - duty, period average, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF

General parameters

• TFT color LCD display with a diagonal of 7" and a resolution of 800 x 480 pixels with a capacitive touch panel
• Interface: USB Host，USB Device, LAN
• Output voltage: 2Vpp input ≥1MΩ load
• Frequency: 1kHz
• Power Supply: 100-120VAC RMS(±10%), 45Hz to 440Hz, CATⅡ, 120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
• Power consumption: <30W
• T-fuse, 3.15A, 250V, 5x20mm
• Operating temperature: 0 to 50 °C
• Dimensions 318 x 140 x 150 mm
• Weight: 2900g

Kit contains

• Oscilloscope
• Test leads
• USB cable
• LAN cable
• Power cord