Micsig MHO3-3504 - 4-channel 350MHz oscilloscope
ID: 1190093
5902186320031
zł14,299.00
Tax included
zł11,625.20 tax excl.
4-channel digital oscilloscope offering a 350 MHz frequency band and a sampling rate of up to 3 GSa/s. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MHO3-3504
Description
The MHO3-3504 is a 4-channel fifth-generation digital oscilloscope offering a 350 MHz bandwidth and a sampling rate of up to 3 GSa/s. It features a built-in memory depth of 360 Mpts. Equipped with a 14-inch touchscreen display with a resolution of 1920 x 1200 pixels, it ensures clear signal waveform visualization. The MHO uses a high-resolution 12-bit ADC with a quantization level of up to 4096—16 times more than traditional 8-bit ADCs—allowing users to observe waveform details more comprehensively and clearly. It features an ultra-thin design (only 3.58 cm thick) and supports VESA mounting, significantly saving desk space.
Thanks to the proprietary Mic-OPI™ probe interface, the oscilloscope automatically detects the attenuation factor of the passive probe, enabling immediate and precise calibration. This solution eliminates the need for manual configuration and improves measurement accuracy. The device is equipped with a standard BNC adapter, ensuring compatibility with a wide range of accessories. Additionally, it offers a rich set of connectors, including USB 3.0 Host, USB Type-C, LAN, HDMI, Trigger Out, and more, facilitating integration with various testing environments.
The oscilloscope's noise level is less than 80 μVrms at full 500 MHz bandwidth, allowing engineers to accurately capture weak but important signals during daily circuit debugging. The deep memory of up to 360 Mpts ensures excellent signal fidelity, while segmented memory divides limited space into several small segments, collecting multiple trigger events into one memory area. This allows for repeated capture of target signals over extended periods and playback for further analysis.
The MHO 3 series features an exceptionally user-friendly interface. It runs on the dedicated SigTestUI™ operating system, specially developed for measurement instruments. With 10 years of UI design experience, the interface has been maximally simplified, allowing even new users to master it within just 5 minutes.
Hardware filtering allows selective passing or blocking of signal components within a specific frequency range, which is very useful for analyzing specific signal frequency bands or observing changes in particular frequency components. In addition to standard passive probes, the oscilloscope supports connections with all Micsig probes: optical isolated probes, high-voltage differential probes, and AC/DC current probes, allowing both the probes and the oscilloscope to operate at peak performance.
Features
- Bandwidth: 350 MHz
- Rise time: 1 ns
- Analog channels: 4
- Real-time sampling rate: 3 GSa/s
- Memory depth: 360 Mpts
- Maximum waveform capture rate: 230,000 wfms/s
- Noise: <80 μVrms
- Vertical resolution: 12-bit
- Trigger types: edge, pulse width, logic, nth edge, pulse, slope, timeout, serial bus
- Bus decoding: RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, MIL-STD-1553B
- Interfaces: USB 3.0 Host, USB Type-C, HDMI, Trigger Out
- Display: 14-inch touchscreen, 1920 x 1200 pixels
- Mobile app, PC remote control, SCPI commands
- SigTestUI™ user interface
- 32 GB internal memory
- VESA mounting support
- Power supply: 100 to 240V AC, 50/60Hz
- Dimensions: 400 x 280 x 35.8 mm
- Weight: 4.3 kg
Kit contains
- Oscilloscope
- 4 x Passive probe
- 4 x MSP-BNC adapter
- Power supply
- Power cord
1190093
Data sheet
- Type of oscilloscope
- Digital
- Bandwidth
- 350 MHz
- Sampling rate
- 3 GSa/s
- Memory depth
- 360 Mpts
- Number of channels
- 4
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A
zł1,444.08
Delivery date unknown
No product available!
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B
zł2,119.70
Delivery date unknown
No product available!
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł1,199.03
24h
Available quantity: 1
Available
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 300 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1503
zł3,906.17
24h
Available quantity: 2
Available
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 500 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1505
Regular pricezł6,624.87zł5,399.00
24h
Available quantity: 2
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is perfect for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP600XS
zł4,059.00
Delivery date unknown
No product available!
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP1200XS
zł4,059.00
Delivery date unknown
No product available!
Other products in the same category (16)
Digital oscilloscope equipped with a 7" TFT LCD display. It has two measurement channels with a 200 MHz bandwidth, a sampling rate of 1 GSa/s and a 14 Mpkt memory buffer. Siglent SDS1202X-E
zł1,689.93
24h
Available quantity: 1
Available
Siglent SDS814X is a digital oscilloscope with a 100 MHz bandwidth, offering 4 analog channels and optionally 16 digital channels. Thanks to SPO technology, it ensures fast waveform capture and precise measurements. With a capture rate of up to 500,000 wfm/s and a record length of up to 100 Mpts, it is ideal for engineers and technicians. It also features an intuitive user interface with a 7-inch touchscreen. Siglent SDS814X
zł2,486.29
4 weeks
No product available!
Digital oscilloscope with two measurement channels. It offers a bandwidth of 200 MHz and a sampling rate of 1 GSa/s. Supplied with software that allows analysis of the tested signals on a PC in real time. Hantek DSO5202P
zł1,599.00
4 weeks
No product available!
Digital oscilloscope equipped with a 7" TFT LCD display. It has four measurement channels with a bandwidth of 100 MHz, a sampling rate of 1 GSa/s and a 14 Mpkt memory buffer. Siglent SDS1104X-E
zł2,101.61
24h
Available quantity: 3
Available
The RIGOL DS1000Z-E series digital oscilloscope, with a bandwidth of 100 MHz and a sampling rate of 1 GSa/s, is an excellent tool for engineers, technicians, and students. With 24 Mpts acquisition memory and support for serial bus triggering and decoding, this oscilloscope provides the reliability and precision needed in many applications. Its compact design and ease of use make it an ideal choice for various tasks. Rigol DS1102Z-E
zł1,801.69
24h
Available quantity: 1
Available
Digital oscilloscope with two measurement channels. It offers a bandwidth of 100 MHz and a sampling rate of 1 GSa/s. Supplied with software that allows analysis of the tested signals on a PC in real time. Hantek DSO5102P
zł1,512.27
24h
Available quantity: 2
Available
4-channel digital oscilloscope, which offers a frequency band of 350 MHz and a sampling rate of up to 3 GSa/s. The device has a built-in memory with a capacity of 360 Mpts, guaranteeing long-term data recording without losing details. It is equipped with a large, 14-inch touch screen with a high resolution of 1920 x 1200 pixels, providing a legible and convenient view of waveforms. Micsig MDO3504
zł12,546.00
4 weeks
No product available!
Micsig MHO14-200 kit-Case is a four-channel, tablet-based 12-bit oscilloscope with a 200 MHz bandwidth, designed for mobile and advanced signal measurements. It supports remote control, serial bus decoding, and multimeter functions, making it a versatile tool for electronics technicians and service engineers. Portable suitcase included in the set.
zł3,717.00
4 weeks
No product available!
A compact and cost-effective digital oscilloscope with four channels, 70 MHz bandwidth, and 12-bit resolution, ideal for professional and educational applications. It offers a sampling rate of up to 1.25 GSa/s, 25 Mpts of memory, and an acquisition rate of up to 1,000,000 wfms/s in UltraAcquire mode, enabling precise capture of even rare signal anomalies. Equipped with a 7-inch touchscreen, intuitive controls, USB, LAN, and HDMI interfaces, and USB-C power, it offers ease of use and portability.
zł1,874.67
4 weeks
No product available!
Micsig MHO68-500 is a high-resolution 12-bit oscilloscope with 500 MHz bandwidth and 8 channels, designed for advanced signal measurements in research and development, educational, and industrial applications. Its integrated 16" display, segmented 1800 Mpts memory, and wide range of protocol decoders ensure measurement versatility and precision.
zł66,969.05
4 weeks
No product available!
The Uni-T UTD1102C is a dual-channel digital storage oscilloscope with a bandwidth of 100 MHz and a sampling rate of 500 MSa/s, ideal for service, education and laboratories. Equipped with a 7-inch LCD display, automatic measurements, waveform recording functions and a USB interface, it provides convenient and precise analysis of electrical signals.
zł2,153.58
2 weeks
No product available!
Digital oscilloscope equipped with a 7" TFT LCD display. It has four measurement channels with a 50 MHz bandwidth, a sampling rate of 1 GSa/s and a 24 Mpts memory buffer. Rigol DS1054Z
zł1,812.64
24h
Available quantity: 1
Available
Digital oscilloscope. It has two measurement channels with 150 MHz bandwidth. Hantek DSO2C15
zł975.00
4 weeks
No product available!
Micsig MHO14-100 kit-Case is a four-channel, tablet-based 12-bit oscilloscope with a 100 MHz bandwidth, designed for mobile and advanced signal measurements. It supports remote control, serial bus decoding, and multimeter functions, making it a versatile tool for electronics technicians and service engineers. Portable suitcase included in the set.
zł3,349.99
4 weeks
No product available!
Digital oscilloscope with built-in signal generator. It has two measurement channels with 100 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek DSO2D10
zł949.44
4 weeks
No product available!
4-channel digital oscilloscope offering a frequency band of 500 MHz and sampling speed up to 3 GSa/s. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MDO5004
zł8,979.00
4 weeks
No product available!
4-channel digital oscilloscope offering a 350 MHz frequency band and a sampling rate of up to 3 GSa/s. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MHO3-3504