CP2100B - current probe for Micsig oscilloscope
ID: 586606
5906623476527
zł2,462.67
Tax included
zł2,002.17 tax excl.
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B
Description
Probe for measuring DC and AC current up to 100 A. Uses standard BNC interface and can be connected to an oscilloscope or a multimeter. It works in the 2,5 MHz band, has two measuring ranges: 10 and 100 A. The probe can work with manual or automatic regulation and is powered by the USB connector. It can be used in industry, automotive electronics, power supplies and inverters. Dedicated to Micsig devices.
Features
- Bandwidth: 2,5 MHz
- Rise Time: 140 ns
- Ranges: 10 A or 100 A.
- Sensitivity: 0.1V/A (10A), 0.01V/A (100A)
- Accuracy:
- 3% ± 50 mA (10A)
- 4% ± 50 mA (100 A, 500 mA to 40 Apk)
- 15% (100 A, 40 Apk to 100 Apk)
- Signal delay: ＜ 150 ns (10 A), ＜ 200 ns (100 A)
- Measurement range:
- 50 mA to 10 Apk (10 A)
- 1 A to 100 Apk (100 A)
- Maximum measured current:
- 100 Apk, 70.7 Arms (DC + ACpk)
- 200 Apk-pk, 70.7 Arms (AC)
- Maximum working voltage: CAT Ⅲ 300V, CAT Ⅱ 600V
- Maximum cable diameter: 13 mm
- Overload indicator: buzzer, lamp
- Power supply: USB 5V
Kit contains
- CP2100B current probe
- USB cable
586606
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
A portable oscilloscope for automotive applications with an 8-inch LCD display and a touch screen. It has four channels and has good measurement parameters: 100 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig SATO1004 Plus
zł3,756.17
24h
Available quantity: 1
Available
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 300 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2302C
zł4,386.35
24h
Available quantity: 1
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP700
zł1,195.19
Delivery date unknown
No product available!
The Micsig SATO2002 is a dual-channel tablet oscilloscope with a 200 MHz bandwidth, offering a maximum sampling rate of 1 GSa/s and a memory depth of 70 Mpts. Equipped with an 8-inch touchscreen LCD, it simplifies automotive diagnostics, including testing charging systems, ignition, and CAN and LIN networks
zł3,398.93
24h
Available quantity: 1
Available
Other products in the same category (16)
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP120XS
zł4,182.00
4 weeks
No product available!
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł1,199.03
24h
Available quantity: 1
Available
A probe tip with attenuation factor of 100X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP100-5
zł4,065.81
4 weeks
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł66.59
24h
Available quantity: 32
Available
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł133.54
24h
Available quantity: 7
Available
Universal measurement probes for a multimeter. Compatible with all Micsig oscilloscopes. Micsig MS-A-005
zł44.94
24h
Available quantity: 2
Available
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 500 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1505
Regular pricezł6,624.87zł5,399.00
24h
Available quantity: 2
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a 500 MHz frequency band and the ability to measure voltages up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP705
zł4,496.14
24h
Available quantity: 1
Available
A 20:1 signal attenuator designed to assist in measuring automotive performance, including measuring fuel injector and primary ignition runs. Hantek HT201
zł51.99
24h
Available quantity: 3
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP300XS
zł4,059.00
4 weeks
No product available!
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
zł92.69
24h
Available quantity: 2
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a 300 MHz frequency band and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3003
zł4,059.00
4 weeks
No product available!
The Zeenko 10 dB SMA attenuator is a solid and precise component for RF measurement paths, useful in diagnostics, calibration and protecting devices such as the tinySA, nanoVNA or RF generators. It enables safe measurements and improves impedance matching quality over a wide frequency range.
zł43.39
24h
Available quantity: 10
Available
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 100 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP1003B
zł3,427.73
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 150 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3001
zł1,499.04
24h
Available quantity: 1
Available
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B