Main view
search
  • Main view
  • Back view
ID: 1186433
5906623408481
zł1,599.00
Tax included

zł1,300.00 tax excl.

Digital oscilloscope with two measurement channels. It offers a bandwidth of 200 MHz and a sampling rate of 1 GSa/s. Supplied with software that allows analysis of the tested signals on a PC in real time. Hantek DSO5202P

4 weeks
Awaiting delivery
Kamami is the official distributor of Hantek oscilloscopes and accessories. All products of this brand in our offer are original and come directly from the manufacturer.

Description

Digital oscilloscope equipped with a 7" TFT LCD display with a resolution of 800 x 480 pixels with the ability to adjust the backlight brightness. It has two measurement channels and is characterized by good operating parameters, including a 200 MHz bandwidth, a sampling rate of 1 GSa/s and a 40K memory buffer. It has numerous built-in functions that facilitate signal analysis, including automatic setting, measurement of various voltage-time parameters, FFT analysis, operation in the X-Y mode, waveform recording and communication with a PC via the USB interface. It is a useful measurement tool widely used in various fields. such as communications, embedded systems, computers, research and education.

Features

Oscilloscope

  • Number of channels: 2
  • Sampling rate: 1GSa/s
  • Input coupling: DC, AC, GND
  • Input impedance: 1MΩ±2% ‖20pF±3pF
  • Probe attenuation factor: 1X, 10X, 100X, 1000X
  • Rated voltage: 300V CAT II
  • Maximum input voltage: 300VRMS (10X)
  • Horizontally
    • Waveform interpolation: (sin x)/x
    • Maximum recording length: 40K
    • Horizontal scale range: 2ns/div~80s/div
    • Zero offset: ±0.5 div x minimum time base gear
    • Sampling frequency and delay time measurement accuracy: ±50ppm
  • Vertically:
    • Frequency band: 200MHz
    • Rise time: 1.8 ns
    • Vertical resolution: 8 bits, each channel samples simultaneously
    • Vertical sensitivity: 2mV/div to 10V/div
    • Offset range ≥ 200mV/div, ±1V, ＜200mV/div ±50V
    • Mathematical operations: +, -, ×, ÷, FFT
    • FFT Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop
    • Bandwidth limit: 20MHz
  • Trigger:
    • Trigger type: edge, pulse width, slope, timeout, window, pattern
    • Trigger level range: ±8 divisions from the center of the screen
    • Trigger mode: auto, normal, single
    • Hold range 100ns to 10s
  • Measurement
    • Voltage difference between cursors △V
    • Time difference between △T cursors
    • Reciprocal of △T, in hertz (1/△T)
    • Automatic measurement: frequency, period, average, peak-to-peak, RMS, minimum, mixmum, rise time, fall time, + width, - width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, - duty, period average, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF

General parameters

  • TFT color LCD display with a diagonal of 7" and a resolution of 800 x 480 pixels with the ability to adjust the backlight brightness
  • Interface: USB Host，USB Device
  • Output voltage: 5Vpp input ≥1MΩ load
  • Frequency: 1kHz
  • Power Supply: 100-120VAC RMS(±10%), 45Hz to 440Hz, CATⅡ, 120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
  • Power consumption: <30W
  • T-fuse, 3.15A, 250V, 5x20mm
  • Operating temperature: 0 to 50 °C
  • Dimensions 385 x 200 x 245 mm
  • Weight: 3500g

Kit contains

  • Oscilloscope
  • Test leads
  • USB cable
  • Power cord
1186433

Data sheet

Type of oscilloscope
Digital
Bandwidth
200 MHz
Sampling rate
1 Gsps
Memory depth
40 kpts
Number of channels
2

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20

You might also like

Other products in the same category (16)