Panda PWR Intelligent Power Management Module - intelligent power supply for 3D printers
ID: 1194724
5906623499397
zł157.66
Tax included
zł128.18 tax excl.
An intelligent power management module that optimizes the power supply of 3D printers, offering functions such as remote control via a local network and monitoring of energy parameters. With a shutdown timer and support for up to 10 printers in combination with BIQU Panda Touch, the module increases energy efficiency and simplifies device management, while overvoltage, overcurrent and short circuit protections ensure safe use. BIGTREETECH Panda PWR Intelligent Power Management Module
Description
Panda PWR Intelligent Power Management Module is an advanced solution designed to optimize power management and enhance the efficiency of 3D printers. With features such as remote control via a local network and advanced monitoring of energy parameters, this device is suitable for both beginners and advanced users. Remote management of power, voltage, and USB peripherals can be performed using a mobile phone or computer, significantly improving user convenience. Panda PWR also features a shutdown timer, enabling automatic power-off to enhance energy efficiency. This function operates even offline, ensuring safe operation at all times. Additionally, when paired with the BIQU Panda Touch, the module allows control of up to 10 3D printers simultaneously, increasing productivity and simplifying device management. With two USB ports, Panda PWR offers extended device support, including both intermittent and continuous power supply options to meet various needs. Moreover, the module is equipped with protection systems against overvoltage, overcurrent, and short circuits, ensuring reliable and safe operation.
Features
- IEC-C14 input: 100VAC to 240VAC
- IEC-C13 output: 100VAC to 220VAC
- USB Type-C port: 5V
- Maximum output current: 1.5A + 1.5A
- USB1 control: intermittent power
- USB2 control: continuous power
- Protection against overvoltage, overcurrent, and short circuits
- Compatibility: FDM 3D printers supporting Klipper
- Requirement: Same LAN with the same IP address
- Dimensions: 141.66 x 65.66 x 34.5 mm
- Cable length: 500 mm
Kit contains
- Panda PWR
- USB-C charging cable
- BTT Duck
1194724
Data sheet
- Cable length (m)
- 0,5 m
- Supply connector
- IEC-C13 / IEC-C14
- Output voltage
- 100–220 V AC / 5 V USB-C
- Supply type
- network
- Output current
- 1,5 A
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Akyga IEC C13 CEE 7/7 250V / 50Hz angle cable with a length of 1.5 meters
zł7.44
24h
Available quantity: 19
Available
High quality, solid power cable. Designed to supply internal ATX, ITX adapters and other devices compatible with the IEC C13 plug. Akyga AK-PC-01A
zł6.89
24h
Available quantity: 9
Available
5-inch touchscreen dedicated to Bambu Lab X1, P1 and A1 series 3D printers. It allows easy management of up to 10 printers at the same time, offering a 2.4G Wi-Fi wireless connection and a charging function, which ensures convenience and mobility of use. Additionally, the set includes a charging station with magnets, and easy plug-and-play installation and power supply via USB-C make it an ideal tool for both professional and hobbyist 3D printing applications. BIGTREETECH Panda Touch V1.0 with USB Dock
zł327.54
24h
Available quantity: 11
Available
Hardened steel gear set with RNC nano coating, optimized for Bambu Lab X1 and P1 3D printers. With its precise design and high wear resistance, Panda Claw ensures smooth filament flow, accurate extrusion and exceptionally detailed prints, even when using abrasive materials. BIQU Panda Claw Extruder Gear Set for Bambu X1/P1
zł106.26
24h
Available quantity: 18
Available
Other products in the same category (16)
Self-adhesive kapton tape 150mm wide, made of polyimide, protects electronic components from high temperatures. It is also used during 3D printing
zł128.12
24h
Available quantity: 2
Available
Self-adhesive kapton tape with a width of 200mm, made of polyimide, protects electronic components from high temperatures. It is also used during 3D printing
zł144.71
24h
Available quantity: 7
Available
Solvent HIPS is a preparation for dissolving supporting structures made of HIPS filament used in 3D printing, used in metal containers or ultrasonic baths, with a dissolution time of 1 to 24 hours, which does not require heating. MICRO CHIP ELEKTRONIC MCP ART.050
zł45.90
24h
Available quantity: 11
Available
Solvent HIPS is a preparation for dissolving HIPS filament support structures used in 3D printing, used in metal containers or ultrasonic baths, with a dissolving time from 1 to 24 hours, which does not require heating. MCP ART.051
zł69.86
24h
Available quantity: 8
Available
Feeler gauge consisting of 17 blades with a thickness of 0.02 to 1 mm. It will work, among others for leveling the table in a 3D printer. Yato YT-7220
zł7.33
24h
Available quantity: 5
Available
Magnetic sheet with adhesive is a practical and universal solution for attaching various objects to magnetic surfaces
zł69.90
24h
Available quantity: 1
Available
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table. Set of 4 pcs
zł6.20
24h
Available quantity: 10
Available
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table. Set of 4 pcs
zł6.69
24h
Available quantity: 4
Available
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table. Set of 4 pcs
zł5.44
24h
Available quantity: 20
Available
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table. Set of 4 pcs
zł5.29
4 weeks
No product available!
A stand supporting the filament spool during 3D printing. The filament is moved thanks to metal rollers that ensure even development of the filament, and silicone anti-slip pads guarantee excellent grip.
zł19.47
24h
Available quantity: 10
Available
SFS V2.0 is a precision photoelectric filament sensor by Bigtreetech, designed for monitoring the 3D printing process. This sensor significantly enhances print control, helping to avoid issues such as clogged nozzles, filament running out, or extruder problems. With advanced features like an LED status indicator and bi-directional feeding, the SFS V2.0 becomes an invaluable tool in any 3D printing workshop. BigtreetechSFS V2.0
zł69.90
24h
Available quantity: 9
Available
Bambu Lab moisture absorber, containing calcium chloride, provides effective protection of the filaments against moisture, guaranteeing the highest quality of 3D prints by eliminating problems related to air bubbles. Bambu Lab Desiccant for AMS
zł32.48
24h
Available quantity: 1
Available
Bambu Lab AMS Hub allows you to connect up to four AMS modules to one Bambu Lab 3D printer, allowing you to support up to 16 filaments. The device provides stable communication via the CAN interface and automates material management, which is useful for multi-material projects and fast color switching
zł291.69
24h
Available quantity: 6
Available
0.3 x 70 mm cleaning needles are precision tools for removing dirt and filament residue from 3D printer nozzles, improving print quality and extending the life of the device. Made of durable stainless steel, they guarantee safe cleaning of small diameter nozzles without the risk of damage.
zł9.94
24h
Available quantity: 8
Available
The 0.3 x 75mm cleaning needles are precision tools for removing filament residue from 3D printer nozzles, made of durable stainless steel. With a length of 75mm, they provide better access to hard-to-reach places, and the package contains 15 pieces, which guarantees long use.
zł19.96
2 weeks
No product available!
An intelligent power management module that optimizes the power supply of 3D printers, offering functions such as remote control via a local network and monitoring of energy parameters. With a shutdown timer and support for up to 10 printers in combination with BIQU Panda Touch, the module increases energy efficiency and simplifies device management, while overvoltage, overcurrent and short circuit protections ensure safe use. BIGTREETECH Panda PWR Intelligent Power Management Module