- -zł2.05
![Seeed XIAO RP2040 - board with RP2040 microcontroller Seeed XIAO RP2040 - board with RP2040 microcontroller](https://kamami.pl/44405-large_default/seeed-xiao-rp2040-board-with-rp2040-microcontroller-102010428.jpg)
zł24.31 tax excl.
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The board is equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0+ cores operating at a frequency of 133 MHz and 264 KB of RAM. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 2 MB connected via the QSPI interface.
In addition to the RP2040 system and Flash memory, the user has a 3.3 V voltage regulator, Boot and Power buttons, an RGB diode, a USB type C connector for powering and programming the module and GPIO outputs, on which such peripherals as 12-bit were led out ADC, PWM inputs, I2C, SPI and UART interface.
The platform supports the popular MicroPython and C/C++ programming languages. Programs can be uploaded to memory via USB interface. The guide with examples of use is available on the product page.
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
Expansion module for Seeeduino XIAO. It is equipped with an OLED display, RTC, MiniSD slot, buzzer, buttons, servo connector and numerous interfaces. Seeed Studio 103030356
Expansion module for Seeeduino XIAO. It is equipped with Grove connectors and a lithium battery charging system. Seeed Studio 103020312
No product available!
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
RGB 5x5 (25 LEDs) matrix LED display module designed for QT Py and Xiao boards. It uses SK6805 addressable LEDs and communicates via a single-wire interface. Adafruit 5646
Miniature module with MicroSD card slot dedicated to QT Py and Xiao boards. Adafruit 5683
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
Board with WiFi and BLE Espressif ESP32-S3 module and OV2640 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and Bluetooth (BLE) 5.0 communication. Seeed Studio 102010448
Compact development board with Renesas RA4M1 microcontroller, ARM Cortex-M4 48 MHz core, 256 KB Flash and 32 KB SRAM, ideal for advanced applications. It offers 19 GPIO, 14-bit ADC, 12-bit DAC, CAN BUS, USB 2.0, RGB LEDs and advanced AES128/256 encryption, and is characterized by low power consumption and small dimensions of 21 x 17.8 mm. Seeed Studio 102010551
The Seeed Xiao ESP32-C6 is a compact module with support for WiFi, Bluetooth, Zigbee, and Thread, making it ideal for Matter-compatible Smart Home applications, offering advanced features and low power consumption.
No product available!
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991054
No product available!
Development kit with nRF52840 microcontroller with ARM Cortex M4F core and BLE communication. Equipped with motion sensors and a microphone. Seeed Studio 102010469
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428