JNCRADIO VNA - vector network analyzer with display
ID: 1178424
zł1,199.00
Tax included
zł974.80 tax excl.
Vector network analyzer with two ports. It can perform measurements at frequencies from 50 kHz to 3 GHz. Equipped with an IPS LCD display, it can be connected to a computer via a USB connector. Seeed Studio 113991034
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
2-port vector network analyzer that can perform measurements at frequencies from 50 kHz to 3 GHz. It offers a dynamic range of up to 80 dB at frequencies up to 50 MHz and up to 70 dB at 3 GHz. It offers a cycle speed of up to 400 points / s, allows you to determine S-parameters, amplitude and phase parameters, as well as quickly and without errors in determining damage in coaxial cables. It has a built-in RF signal generator up to 4.4 GHz with adjustable output power. It can also be used as a simple signal generator. It can be used to analyze antennas, amplifiers, cables and filters.
The VNA has a built-in 4.3" IPS LCD display and supports saving and exporting files with RTC timestamp. Also added a time domain reflectometry function for increased efficiency. Built-in lithium battery provides device standby up to 5 hours. Compatible with Nanovna-Save software PC and its firmware is updated using USB Type-C.
Features
- 2-port vector network analyzer
- Frequency range: 50 kHz to 3 GHz
- Typical dynamic range: for 50 MHz to 80 dB, for 3 GHz to 70 dB
- Number of points per cycle (sweep points): 11 to 501 (configurable)
- The output power, -14 dBm at 3 GHz, varies with frequency
- Measurement rate: 400 pts/s
- 4.3" IPS LCD display with touch screen
- 3.7V 5000mAh battery
- Charging and communication connector: USB Type-C
- Power output: 5V, 1A (USB type A)
- RF connector: SMA
- Dimensions: 130 x 75 x 22 mm
- Aluminum housing
Kit contains
- JNCRadio VNA 3G
- Cable 20cm SMA-JJ RG316
- Calibration kit
- SMA-KK adapter
- SMA-JJ adapter
- SMA-JKW adapter
- USB Type-C cable
- Stylus
1178424
You might also like
No product available!
Vector network analyzer with two ports. It can perform measurements at frequencies from 500 kHz to 4 GHz. Connected to a computer via USB. Pocket VNA
Delivery date unknown
No product available!
Lan tester can easily read the correct pin configuration of 10Base-T cable, 10Base-2 cable, RJ45/RJ11 modular cables, 258A, TIA-568A/568B and Token Ring cable etc. by comparing one transmitting end to the corresponding receiving end. z28586
zł66.42
Delivery date unknown
No product available!
Other products in the same category (16)
The Fnirsi DMT-99 is an advanced digital multimeter with rich functionality, offering precise measurements and high reliability in a compact form, ideal for versatile applications. Fnirsi DMT-99
zł204.13
24h
Available quantity: 10
Available
Sound level meter (sonometer). Used to measure industrial and environmental noise levels. Uni-T UT352
zł577.03
6 weeks
No product available!
Quick 492G station designed for testing personal grounding in industrial conditions
zł3,308.70
6 weeks
No product available!
A universal calibrator that allows both simulation and measurement of various electrical and thermal parameters. It is able to emulate thermocouple signals and enables accurate measurement of direct voltage (DC), resistance and current, as well as testing and calibration of thermocouples and Pt100 and Cu50 thermoresistance sensors. LB02
zł610.17
24h
Available quantity: 2
Available
Gas leak detector with an alarm that detects, among others, methane, carbon monoxide, hexane and acetylene. It is equipped with a very sensitive sensor and an easy-to-read LCD display. Habotest HT601A
zł122.89
24h
Available quantity: 31
Available
A detector that can detect hidden objects behind walls, such as metals, live electrical cables and wood. Equipped with a display with indicators and an audible alarm. Fnirsi WD-01
zł148.03
24h
Available quantity: 2
Available
The leak tester for gas installations is a precise device that allows you to detect, among others: natural gas, propane, butane, methane, propanol, ethanol, ammonia, carbon monoxide, gasoline vapors, hydrogen sulfide. The device also reacts to water vapor, paint fumes, solvents, kerosene, smoke, etc.
zł120.68
24h
Available quantity: 4
Available
DAQ device based on Ethernet communication and equipped with 8 SE/4 DIFF analog inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 250 kS/s. Digilent 6069-410-016
zł3,078.12
4 weeks
No product available!
The detector detects hidden objects behind walls, such as metals, live electrical cables and wood. Equipped with a display with indicators and an acoustic signaling device. Uni-T UT387B
zł230.63
6 weeks
No product available!
Tester dedicated to testing parameters in lead-acid batteries. It can check the working status of the battery by testing the starting process, charging process and electric load process, and then quickly and accurately analyze the battery\'s life status. Hantek HT2018B
zł170.00
24h
Available quantity: 3
Available
Portable electronic component meter (LCR tester). Allows testing of common components used in electronics, including diodes, transistors, capacitors and resistors. Fnirsi M328 Blue
zł73.49
24h
Available quantity: 7
Available
DAQ device based on USB communication and equipped with 8 analog SE/4 DIFF inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-013
zł2,198.99
4 weeks
No product available!
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-009
zł1,049.01
4 weeks
No product available!
Gas leak detector with alarm that detects, among others, methane, carbon monoxide, hexane and acetylene. It is equipped with a very sensitive sensor. The measurement result is displayed on a small LCD screen in the form of a bar graph.
zł79.42
24h
Available quantity: 15
Available
The PZEM-031 energy consumption meter is a device for internal use with a large LCD display that measures voltage, current, active power and energy in the voltage range of 6.5-100V DC and current 0-20A. It comes with power alarm, data memory and backlight control functions, but does not include additional cables or accessories.
zł72.59
24h
Available quantity: 1
Available
DC analyzer with a voltage measuring range from 4 to 60 V and current up to 100 A. It allows you to measure power, capacity and energy in the circuit
zł60.50
6 weeks
No product available!
Vector network analyzer with two ports. It can perform measurements at frequencies from 50 kHz to 3 GHz. Equipped with an IPS LCD display, it can be connected to a computer via a USB connector. Seeed Studio 113991034