

The Measurement Computing USB-1608GX are USB-based, high-speed, multifunction DAQ devices. Each device offers 16 SE/8 DIFF analog inputs, eight digital I/O channels, two counter inputs, and one timer output. These devices are USB-powered and require no external power.
These devices provide 16-bit analog inputs that are software-selectable as eight DIFF or 16 SE inputs. They also support input ranges of ±10 V, ±5 V, ±2 V, and ±1 V that are software-selectable per channel. Both devices feature a maximum 500 kS/s sample rate.
USB-1608G Series devices have an external digital trigger input. The trigger mode is software-selectable for edge- or level-sensitive mode. Users can configure edge-sensitive mode for either rising or falling edge. In level-sensitive mode, the trigger can be configured for either high or low level. The default setting at power up is edge sensitive, rising edge.
Eight bidirectional digital I/O lines are individually configurable for input or output. The DIO terminals can detect the state of any TTL-level input. Users can configure for pull-up (+5 V) or pull-down (0 V) with an onboard jumper.
Two 32-bit event counters are provided to count TTL pulses. The counters accept inputs of up to 20 MHz.
A PWM timer output generates a pulse output with a programmable frequency in the range of 0.0149 Hz to 32 MHz. The timer output parameters are software selectable.
Software support includes DAQami, an optional out-of-the-box application for data logging, visualization, and signal generation. Data can be viewed in real-time or post-acquisition on user-configurable displays. Drivers are included for the most popular applications and programming languages including Visual C++®, Visual C#®, Visual Basic®.NET, DASYLab®, LabVIEW™, MATLAB®, Linux®, and Python™.
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-008
No product available!
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-009
No product available!
DAQ device based on USB communication and equipped with 8 analog SE / DIFF inputs, two analog outputs, 4 digital I/O, two counters and two inputs for encoder support. It offers 18-bit resolution and a sampling rate of 200 kS/s. Digilent 6069-410-014
No product available!
Gas leak detector with an alarm that detects, among others, methane, carbon monoxide, hexane and acetylene. It is equipped with a very sensitive sensor and an easy-to-read LCD display. Habotest HT601A
A universal calibrator that allows both simulation and measurement of various electrical and thermal parameters. It is able to emulate thermocouple signals and enables accurate measurement of direct voltage (DC), resistance and current, as well as testing and calibration of thermocouples and Pt100 and Cu50 thermoresistance sensors. LB02
DAQ device based on USB communication and equipped with 8 differential analog inputs, 8 digital inputs/outputs and a counter input. It offers 24-bit resolution and is dedicated to temperature measurements. Digilent 6069-410-020
No product available!
A compact tweezers meter that allows for precise measurement of resistance, capacitance, and inductance, as well as diode and continuity testing. Equipped with a 1.14-inch color display, magnetic hold function, and three test frequencies, the device is suitable for versatile use in the field and laboratory. Its lightweight design and long battery life make the LCR-ST1 a convenient and reliable tool for electronics technicians and engineers. Fnirsi LCR-ST1
Non-contact tachometer for rotational speed measurement. Equipped with a 5-digit display and a USB interface. UNI-T UT372
No product available!
Advanced spectrum analyzer with a working range from 100 kHz to 8 GHz, equipped with a 4-inch touchscreen and features such as a signal generator, bandpass filter and automatic calibration. With battery power (5000 mAh) and USB operation, it is a versatile measurement tool for hobbyists and professionals working with RF signals. tinySA Ultra+ ZS407
No product available!
Portable VNA with 4-inch touchscreen, enabling precise measurements in the range from 10 kHz to 1.5 GHz. With good dynamics, metal housing and support for S11 and S21 measurements, it is a versatile tool for analyzing antennas and RF paths both in the field and in the laboratory. nanoVNA-H4
Li-Fe battery monitor that can measure voltage, current, power during charging and discharging, and watt-hours consumed and run time. The user can use a mobile application and a computer to control the measuring module. Juntek KG110F
The leak tester for gas installations is a precise device that allows you to detect, among others: natural gas, propane, butane, methane, propanol, ethanol, ammonia, carbon monoxide, gasoline vapors, hydrogen sulfide. The device also reacts to water vapor, paint fumes, solvents, kerosene, smoke, etc.
No product available!
The RF signal meter is a versatile tool for measuring and analysing frequencies from 50 MHz to 2.4 GHz. It has an LCD display, extendable antenna and is powered by a 9V battery. GOOIT GY560
The air quality monitor allows you to monitor the concentration of formaldehyde (HCHO) in the air in real time. The device also measures temperature and air humidity. Uni-T A15F
No product available!
MCC USB-DIO24H/37 is a digital I/O module with 24 channels, TTL signal support, USB power, and high current handling up to 64 mA. Digilent 6069-410-055
No product available!
Portable electronic component meter (LCR tester). Allows testing of common components used in electronics, including diodes, transistors, capacitors and resistors. Fnirsi LCR-T7
Electronic components tester with a 3.5" color display. It allows you to check, among others, IR signals, transistors, diodes, capacitors, resistors and coils. Has a built-in battery. LCR-TC1
USB-based DAQ device with 16 single-ended or 8 differential analog inputs, two analog outputs, 8 digital I/O, and two counter inputs and one output. It offers 16-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-011
No product available!
Ionising radiation detector (a.k.a. dosimeter or Geiger counter). It is used to measure the dose of ionising radiation, i.e. the amount of energy that is absorbed by an organism or material during exposure to radiation. It is capable of detecting three types of radiation: X-rays (X-rays), Y-rays and β-rays. Fnirsi GC-01 Blue
USB-based DAQ device with 16 single-ended or 8 differential analog inputs, 8 digital I/O, and two counter inputs and one output. It offers 16-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-010