

Electronic components tester with a 128x64 pixel display. It allows you to check, among others transistors, diodes, capacitors, resistors and inductors. The board is equipped with a ZIF-14 stand, which is used to connect the tested elements and a button that triggers the measurement. The meter automatically detects NPN, PNP, N-channel and P-channel MOSFET, JFET, diodes and thyristors. It is powered by a 9 V battery. The set includes an acrylic housing.
The device is based on the ATmega328P microcontroller, and the board has pads for updating the software. If the results are incorrect, please calibrate. For this purpose, the pins 1, 2, 3 should be short-circuited and the button should be pressed. The meter calibrates using a 100 nF capacitor that must be placed in the meter.
Note!
Before connecting the capacitor, it must be discharged. Connecting a charged capacitor may cause permanent damage to the measuring instrument.Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Kinetic 6F22 alkaline battery (9V voltage) 1 piece. Weight 47g
GP1604A/6LF22/6LR61/MN1604 alkaline battery with a voltage of 9V. GP 1604A
6F22 alkaline battery with a voltage of 9V and a capacity of 550mAh. Maxell 6F22
Electronic components tester with a 3.5" color display. It allows you to check, among others, IR signals, transistors, diodes, capacitors, resistors and coils. Has a built-in battery. LCR-TC1
The MCC USB-TC data acquisition system enables data reading from thermocouple-based temperature sensors. Digilent 6069-410-021
No product available!
DAQ device based on USB communication and equipped with 8 analog outputs, 8 digital inputs/outputs and one 32-bit counter. Offers 16-bit resolution. Digilent 6069-410-054
No product available!
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-009
No product available!
DAQ device based on USB communication and equipped with 8 differential analog inputs and 8 digital inputs/outputs. It offers 24-bit resolution and is dedicated to temperature measurements. Digilent 6069-410-065
No product available!
The PZEM-031 energy consumption meter is a device for internal use with a large LCD display that measures voltage, current, active power and energy in the voltage range of 6.5-100V DC and current 0-20A. It comes with power alarm, data memory and backlight control functions, but does not include additional cables or accessories.
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"
NEO Tools 71-225 keychain spirit level with a single vial for quick level checks anywhere. Compliant with MID standard, practical as a handy tool for work and everyday use.
DAQ device based on Ethernet communication and equipped with 8 SE/4 DIFF analog inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 250 kS/s. Digilent 6069-410-016
No product available!
Ionising radiation detector (a.k.a. dosimeter or Geiger counter). It is used to measure the dose of ionising radiation, i.e. the amount of energy that is absorbed by an organism or material during exposure to radiation. It is capable of detecting three types of radiation: X-rays (X-rays), Y-rays and β-rays. Fnirsi GC-01
The RF signal meter is a versatile tool for measuring and analysing frequencies from 50 MHz to 2.4 GHz. It has an LCD display, extendable antenna and is powered by a 9V battery. GOOIT GY560
Quick 492G station designed for testing personal grounding in industrial conditions
Electronic components tester with a 3.5" color display. It allows you to check, among others, IR signals, transistors, diodes, capacitors, resistors and coils. Has a built-in battery. LCR-TC1
Gas leak detector with an alarm that detects, among others, methane, carbon monoxide, hexane and acetylene. It is equipped with a very sensitive sensor and an easy-to-read LCD display. Habotest HT601A
NEO TOOLS 71-030 is a compact 20 cm aluminum spirit level with two vials, providing precise horizontal and vertical measurements. Its solid construction and accuracy below 0.5 mm/m make it a suitable tool for both professional and household use.
The Fnirsi FDM01 sound level meter allows you to measure sound intensity and is useful for professionals who need accurate acoustic data
Gas leak detector with alarm that detects, among others, methane, carbon monoxide, hexane and acetylene. It is equipped with a very sensitive sensor. The measurement result is displayed on a small LCD screen in the form of a bar graph.
Electronic components tester with a 128x64 pixel display. It allows you to check, among others transistors, diodes, capacitors, resistors and inductors. Acrylic housing included. LCR-T4