

zł1,166.78 tax excl.
DAQ device based on USB communication and equipped with 8 analog SE/4 DIFF inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 50 kS/s. Digilent 6069-410-012
The Measurement Computing USB-231 are USB-based, 16-bit, multifunction DAQ devices. They feature 8 SE/4 DIFF analog inputs, with a fixed analog input range of ±10 V, 16-bit resolution, two 16-bit analog outputs, eight digital I/O, and one 32-bit counter. The USB-231 features a 50 kS/s sample rate.
Each device provides two 16-bit analog outputs. One or both outputs can be updated at a rate up to 5 kS/s per channel. The output range is fixed at ±10 V.
Eight TTL-level digital I/O lines are included with USB-230 Series devices. Each channel is software-selectable for input or output. Digital input voltage ranges from 0 V to 5 V are supported, with thresholds of 0.8 V (low) and 2.3 V (high). When used in output mode, each digital channel allows for 3.3 V operation with a source/sink current limit of ±4 mA. All DIO lines are set to high-impedance inputs at system startup and reset. The device does not drive the signal high or low. Each line has a weak pull-down resistor connected to it. All digital I/O updates and samples are software-paced.
USB-230 Series devices include an external digital trigger input that is softwareselectable for rising edge or falling edge detection.
USB-230 Series devices support one 32-bit edge counter (rising) that accepts inputs up to 5 MHz.
Software support includes DAQami, an optional out-of-the-box application for data logging, visualization, and signal generation. Data can be viewed in real-time or post-acquisition on user-configurable displays. Drivers are included for the most popular applications and programming languages including Visual C++®, Visual C#®, Visual Basic®.NET, DASYLab®, LabVIEW™, MATLAB®, and Python™.
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-008
No product available!
USB-based DAQ device with 16 single-ended or 8 differential analog inputs, 8 digital I/O, and two counter inputs and one output. It offers 16-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-010
No product available!
DAQ device based on USB communication and equipped with 8 analog SE/4 DIFF inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-013
No product available!
DAQ device based on USB communication and equipped with 8 analog SE / DIFF inputs, two analog outputs, 4 digital I/O, two counters and two inputs for encoder support. It offers 18-bit resolution and a sampling rate of 200 kS/s. Digilent 6069-410-014
No product available!
NEO TOOLS 71-030 is a compact 20 cm aluminum spirit level with two vials, providing precise horizontal and vertical measurements. Its solid construction and accuracy below 0.5 mm/m make it a suitable tool for both professional and household use.
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-008
No product available!
Test board dedicated to VNA analyzers. It is equipped with 18 templates and filters that allow you to learn how the device works
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"
Electronic components tester with a 128x64 pixel display. It allows you to check, among others transistors, diodes, capacitors, resistors and inductors. Acrylic housing included. LCR-T4
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nano V2 2.8"
4-port electronic calibration module designed to work with vector network analyzers such as LibreVNA, in the frequency range from 9 kHz to 6 GHz. It enables automatic and precise calibration, replacing traditional sets (Open, Short, Load 50Ω), which simplifies measurements and minimizes errors resulting from manual operation. LibreCAL
The Uni-T UT353 is a compact sound level meter measuring sound levels from 30 dB to 130 dB, ideal for precise noise monitoring in various environments. Equipped with a clear LCD display and a memory function, it provides convenience of use thanks to its lightweight design and automatic shutdown.
No product available!
DAQ device based on USB communication and equipped with 8 analog SE / DIFF inputs, two analog outputs, 4 digital I/O, two counters and two inputs for encoder support. It offers 18-bit resolution and a sampling rate of 200 kS/s. Digilent 6069-410-014
No product available!
Kompaktowy detektor, który umożliwia pomiar promienistego, pola magnetycznego. zasięg w tubie Geigera-Müllera (J321/M4011) obejmujący czułość i dokładne odczyty w szerokim zakresie, a elektryczny ekran 2,4" zapewnia czytelny przepływ wyników w czasie naturalnym. Obsługuje pewne γ, X i twarde β, posiadają tryby alarmów, dźwiękowy i wibracyjny oraz włączone wykresów elektronicznych. Fnirsi GC-03 czarny
No product available!
Li-Fe battery monitor that can measure voltage, current, power during charging and discharging, and watt-hours consumed and run time. The user can use a mobile application and a computer to control the measuring module. Juntek KG110F
A compact tweezers meter that allows for precise measurement of resistance, capacitance, and inductance, as well as diode and continuity testing. Equipped with a 1.14-inch color display, magnetic hold function, and three test frequencies, the device is suitable for versatile use in the field and laboratory. Its lightweight design and long battery life make the LCR-ST1 a convenient and reliable tool for electronics technicians and engineers. Fnirsi LCR-ST1
No product available!
The electromagnetic field meter is used to measure electric radiation and magnetic emission. The device is also equipped with a temperature sensor. It also has the function of charging the batteries with a USB cable.
The RF signal meter is a versatile tool for measuring and analysing frequencies from 50 MHz to 2.4 GHz. It has an LCD display, extendable antenna and is powered by a 9V battery. GOOIT GY560
The 0-25 mm digital micrometer is a reliable tool for professionals that provides precise measurements with easy reading of the results. It is ideal for accurately measuring a variety of objects in workshop or laboratory conditions. YT-72305
The GOOIT GY561 is a portable frequency and RF power meter supporting a range of 50 MHz to 2.4 GHz. With its simple operation and compact size, it is ideal for quickly determining the parameters of operating transmitters in the field.
DAQ device based on USB communication and equipped with 8 analog SE/4 DIFF inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 50 kS/s. Digilent 6069-410-012