

zł2,502.54 tax excl.
DAQ device based on Ethernet communication and equipped with 8 SE/4 DIFF analog inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 250 kS/s. Digilent 6069-410-016
The Measurement ComputingE-1608 is an ethernet-based DAQ device and features 8 SE/4 DIFF analog inputs, 16-bit resolution, 250 kS/s sample rate, two 16-bit analog outputs, eight digital I/O, and one 32-bit counter input. The device supports input ranges of ±10 V, ±5 V, ±2 V, and ±1 V that are software-selectable per channel.
The E-1608 has a built-in 10/100 BASE-T auto-negotiation, high-speed communication port. The networking protocols are TCP/IP and UDP. Once connected to the network, the device can be remotely accessed and configured through software from anywhere on the network. Only one user at a time can access the E-1608. Software is required to actively communicate with the E-1608 over Ethernet. The device does not operate as a standalone data logger. The device is externally powered via an included power supply.
The E-1608 has two 16-bit, software-paced analog outputs that can be updated at a rate of 500 S/s. The output range is fixed at ±10 V.
The E-1608 has an external digital trigger input. The trigger mode is software-selectable for edge- or level-sensitive mode. Edge-sensitive mode can be configured for either rising or falling edge. Level-sensitive mode can be configured for either high or low level. The default setting at power up is edge-sensitive, rising edge.
Eight bidirectional digital I/O bits are individually-configurable for input or output. The digital I/O terminals can detect the state of any TTL-level input. Bits can be configured for pull-up (+5V) or pull-down (0 V) with an onboard jumper.
One 32-bit event counter can count TTL pulses. The counter accepts inputs of up to 10 MHz. The E-1608 has one external clock input and one clock output for analog inputs.
Software support includes DAQami, an optional out-of-the-box application for data logging, visualization, and signal generation. Data can be viewed in real-time or post-acquisition on user-configurable displays. Drivers are included for the most popular applications and programming languages including Visual C++®, Visual C#®, Visual Basic®.NET, DASYLab®, LabVIEW™, MATLAB®, and Python™.
Ethernet Cable 1M
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-008
No product available!
DAQ device based on USB communication and equipped with 8 analog SE / DIFF inputs, two analog outputs, 4 digital I/O, two counters and two inputs for encoder support. It offers 18-bit resolution and a sampling rate of 200 kS/s. Digilent 6069-410-014
No product available!
A holder for mounting on a DIN rail dedicated to devices from the BTH-1208LS, E-1608, E-DIO24, USB-200 and WebDAQ series. Digilent 6069-240-005
No product available!
Multifunctional computer attachment with USB type C interface. It can operate as a 2-channel oscilloscope, 16-channel logic state analyser, signal generator or programmable power supply. Comes with BNC adapter and oscilloscope probes and Mini Grabber clips. Digilent 471-060
No product available!
NEO TOOLS S 300 (71-131) is a 40 cm aluminum spirit level with three vials for measuring level, plumb, and 45° angle. It offers high precision and solid construction, making it a suitable tool for both professional construction work and precise DIY tasks.
A compact tweezers meter that allows for precise measurement of resistance, capacitance, and inductance, as well as diode and continuity testing. Equipped with a 1.14-inch color display, magnetic hold function, and three test frequencies, the device is suitable for versatile use in the field and laboratory. Its lightweight design and long battery life make the LCR-ST1 a convenient and reliable tool for electronics technicians and engineers. Fnirsi LCR-ST1
No product available!
DAQ device based on USB communication and equipped with 8 analog SE / DIFF inputs, two analog outputs, 4 digital I/O, two counters and two inputs for encoder support. It offers 18-bit resolution and a sampling rate of 200 kS/s. Digilent 6069-410-014
No product available!
DAQ device based on USB communication and equipped with 16 analog outputs, 8 digital inputs/outputs and one 32-bit counter. Offers 16-bit resolution. Digilent 6069-410-029
No product available!
Li-Fe battery monitor that can measure voltage, current, power during charging and discharging, and watt-hours consumed and run time. The user can use a mobile application and a computer to control the measuring module. Juntek KG110F
The air quality monitor allows you to monitor the concentration of formaldehyde (HCHO) in the air in real time. The device also measures temperature and air humidity. Uni-T A15F
No product available!
Gas leak detector with an alarm that detects, among others, methane, carbon monoxide, hexane and acetylene. It is equipped with a very sensitive sensor and an easy-to-read LCD display. Habotest HT601A
No product available!
Network analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 5.3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA Ultra
No product available!
A portable combustible gas detector designed to detect methane, propane, and isobutane. The device features a 2.0" color TFT screen, three alarm modes (audible, visual, and vibrating), and a flexible 36 cm probe for easy access to hard-to-reach areas. A response time of less than 5 seconds and the ability to record up to 30 alarm events ensure fast and precise threat detection. Fnirsi GD-02
No product available!
DAQ device based on USB communication and equipped with 8 differential analog inputs, 8 digital inputs/outputs and a counter input. It offers 24-bit resolution and is dedicated to temperature measurements. Digilent 6069-410-020
No product available!
HT602B is a digital sound level meter with a measurement range of 30-130 dBA/C, operating in the frequency range of 30 Hz - 8 KHz. It offers fast and slow measurement times, backlight, data hold function and auto power off for energy saving.
Portable frequency and phase analyzer based on NanoVNA-H4, designed for precise comparison of signals in the range from 1 MHz to 300 MHz, ideal for testing 10 MHz clocks, among others. With a touch screen, data logging and a built-in 2000 mAh battery, it is a mobile tool for engineers and electronics enthusiasts who require high measurement accuracy. tinyPFA
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-008
No product available!
4-port electronic calibration module designed to work with vector network analyzers such as LibreVNA, in the frequency range from 9 kHz to 6 GHz. It enables automatic and precise calibration, replacing traditional sets (Open, Short, Load 50Ω), which simplifies measurements and minimizes errors resulting from manual operation. LibreCAL
Compact vector analyzer, enabling measurements in a wide frequency range from 50 kHz to 6.3 GHz, ideal for analyzing antennas and RF systems in the HF, VHF, UHF and WiFi bands. With a 3.95" touch screen, USB-C interface and support for VNA-QT software, it offers convenient operation and professional analysis of results both in the field and in the laboratory. liteVNA 64
No product available!
The detector detects hidden objects behind walls, such as metals, live electrical cables and wood. Equipped with a display with indicators and an acoustic signaling device. Uni-T UT387B
No product available!
DAQ device based on Ethernet communication and equipped with 8 SE/4 DIFF analog inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 250 kS/s. Digilent 6069-410-016