UT372 - RPM meter (tachometer) with USB interface

DAQ device based on USB communication and equipped with 8 analog outputs, 8 digital inputs/outputs and one 32-bit counter. Offers 16-bit resolution. Digilent 6069-410-054

DAQ device based on USB communication and equipped with 8 analog SE/4 DIFF inputs, two analog outputs, 8 digital inputs/outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 50 kS/s. Digilent 6069-410-012

Portable electronic component meter (LCR tester). Allows testing of common components used in electronics, including diodes, transistors, capacitors and resistors. Fnirsi M328 Blue

Portable electronic component meter (LCR tester). Allows testing of common components used in electronics, including diodes, transistors, capacitors and resistors. Fnirsi M328 Black

Vector network analyzer with two ports. It can perform measurements at frequencies from 50 kHz to 3 GHz. Equipped with an IPS LCD display, it can be connected to a computer via a USB connector. Seeed Studio 113991034

Illuminance meter. The device can measure the light intensity and display the results in Lux or FC units. Uni-T UT383

MCC USB-3102 – USB module with 4 voltage/current outputs, 8 digital I/O lines, and a 32-bit counter input. Digilent 6069-410-030

Compact vector analyzer, enabling measurements in a wide frequency range from 50 kHz to 6.3 GHz, ideal for analyzing antennas and RF systems in the HF, VHF, UHF and WiFi bands. With a 3.95" touch screen, USB-C interface and support for VNA-QT software, it offers convenient operation and professional analysis of results both in the field and in the laboratory. liteVNA 64

Tester dedicated to testing parameters in lead-acid batteries. It can check the working status of the battery by testing the starting process, charging process and electric load process, and then quickly and accurately analyze the battery\'s life status. Hantek HT2018B

Li-Fe battery monitor that can measure voltage, current, power during charging and discharging, and watt-hours consumed and run time. The user can use a mobile application and a computer to control the measuring module. Juntek KG110F

Gas leak detector with alarm that detects, among others, methane, carbon monoxide, hexane and acetylene. It is equipped with a very sensitive sensor. The measurement result is displayed on a small LCD screen in the form of a bar graph.

Ionising radiation detector (a.k.a. dosimeter or Geiger counter). It is used to measure the dose of ionising radiation, i.e. the amount of energy that is absorbed by an organism or material during exposure to radiation. It is capable of detecting three types of radiation: X-rays (X-rays), Y-rays and β-rays. Fnirsi GC-01

Quick 492G station designed for testing personal grounding in industrial conditions

Spectrum analyzer with two ports. It can perform measurements for frequencies from 100 kHz to 960 MHz. Equipped with an LCD display, it can be connected to a computer via USB. TinySA

Portable antenna analyzer with a working range from 50 kHz to 3 GHz, ideal for testing 50 Ohm installations and analyzing filters and S-parameters. Equipped with a 4-inch touchscreen, 3000 mAh battery and support for Windows, Linux and macOS, it offers high precision and portability for hobbyists and professionals. NanoVNA SAA2N

Test probes with silver-plated brass tips are a high-quality tool for every electronics professional. Their precision, durability and resistance to high temperatures make them a reliable choice for specialists requiring the highest accuracy and reliability in their measurement work. YT-73077