

zł1,263.24 tax excl.
Module with NEO-F9P GNSS receiver. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo and Beidou, and offers accuracy of up to 10 mm using an RTK base station. It offers five communication ports: USB type C, UART1, UART2 for RTCM, I2C and SPI reception and Qwiic connectors. SparkFun GPS-23288
GNSS-RTK L1/L5 Breakout is an advanced GNSS board designed for the highest precision and versatility. Unlike standard solutions based on L1/L2 bands, the NEO-F9P model uses L1/L5 bands, which translates into excellent performance even in difficult urban conditions. L5 signals are protected from RF interference, ensuring more reliable and precise localization.
The heart of the module is the powerful u-blox F9 GNSS receiver with 184 channels, capable of receiving signals from GPS, GLONASS, Galileo and BeiDou systems with an accuracy of only 10 mm. The module enables simultaneous reception of four GNSS systems and has a field measurement mode that allows it to function as a base station generating RTCM 3.x correction data. To ensure operational continuity and quick start, a battery has been added to the board to store the module configuration and satellite data for up to two weeks. This solution reduces the initialization time from a cold start from 27 s to 3 s. Moreover, NEO-F9P offers as many as five communication ports: USB type C, UART1, UART2 for RTCM reception, I2C and SPI. Using the Qwiic system, you can connect the module to the base board. 2.54 mm standard pins are also available, ideal for connecting to prototype boards.
Configuring u-blox-based GPS products is simple with u-center for Windows. In the SparkFun Arduino library you will find examples of using the full potential of the NEO-F9P, from changing the transmission speed to geosecurity.
Attention!
This product requires an antenna.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
No product available!
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036
Module with a cryptographic coprocessor based on the ATECC508A system. It allows you to add strong authentication security to an IoT node or embedded system. I2C communication. SparkFun DEV-15573
No product available!
The expansion module is designed to work with Raspberry Pi 400 - a portable computer built into the keyboard. The board has a 40-pin connector in the pin position and two Qwiic connectors. SparkFun DEV-17512
No product available!
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. The set includes a module with Qwiic SparkFun SEN-18009 connectors
No product available!
Module with an ambient light sensor VEML6030 with a measuring range up to 120,000 lx. It enables light measurement with 16-bit resolution. I2C communication. SparkFun SEN-15436
Module with a button and green LED backlight. Controlled by the I2C interface, it has a built-in debouncing mechanism, pull-up resistors as well as interrupts and a FIFO queue. SparkFun BOB-16842
No product available!
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
The expansion module is designed for micro:bit sets. Offers a simple, beginner-friendly robotics controller. SparkFun DEV-15713
Module with EEPROM memory, capacity 512 kbit (64kB). Communication takes place via the I2C interface. The module has 3 jumpers that enable selection of one of 8 addresses. SparkFun SPX-14764
Module with an IO pin expander based on the TCA9534 system. It allows you to add 8 GPIO pins to an I2C-controlled project. SparkFun DEV-17047
No product available!
Module with a satellite data receiver for transmission with L-band correction. It can be configured for use with various correction services to achieve centimeter-level positioning accuracy. SparkFun GPS-19390
No product available!
Sound module supported by I2C interface, which allows to generate sound signals in simple projects thanks to Qwiic system and ATtiny84 microcontroller. With support of Arduino libraries, users can control volume, frequency and duration of sound, which makes it ideal for applications such as alarms or signals in robots. SparkFun BOB-24474
No product available!
No product available!
Module with 2 relays controlled by the I2C interface. Each relay can switch currents up to 25 A at 12 to 280 V AC. SparkFun COM-16810
No product available!
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
No product available!
Module with NEO-F9P GNSS receiver. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo and Beidou, and offers accuracy of up to 10 mm using an RTK base station. It offers five communication ports: USB type C, UART1, UART2 for RTCM, I2C and SPI reception and Qwiic connectors. SparkFun GPS-23288