 
        
           
        
           
         
           
           
          zł11.04 tax excl.
The adapter allows for prototyping using the GPIO connectors of Raspberry computers, and thanks to the IDC 40-pin tape it is possible to securely and securely connect the adapter with the RPI output
Pi Cobbler + allows convenient connection of GPIO line signals to the contact board, without the need to connect individual wires and the risk of accidental short circuits. The lower leads of the adapter allow for a secure placement of the adapter in the contact board, without the risk of interference or discontinuity in the signal caused by a weak contact. On the Cobbler board there are descriptions of the outgoing lines, thanks to which attaching signals is simple and convenient.

Contact plate is not included!
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
 No product available!
Prototype contact plate 760 points with dimensions 189 x 46 x 8 mm. PPS0760
Adafruit 723 - Adafruit Perma-Proto Mint Tin Size Breadboard PCB
 No product available!
Raspberry Pi 1 model B + is a popular single board computer with Broadcom BCM2835 processor (700MHz, ARM1176JZF-S core) and 512 MB RAM. The computer runs under Linux (eg Raspbian). There are, among others, 4 USB ports, HDMI connector, camera connector
A prototype contact plate, 176 x 46 x 8 mm, has 700 points. PPS0700
 No product available!
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
 No product available!
Connecting ribbon with a length of 15 cm (40 wires), terminated on both sides with 2x20 pin female connectors. The cable can be used to connect Raspberry Pi with prototyping accessories (eg T-Cobbler Plus)
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
 No product available!
T-Cobbler adapter enabling connection of GPIO Raspberry Pi A +, B +, Pi 2, Pi 3, Pi 4 and Pi 5 lines to the breadboard (2.54 mm). Adapter assembled, included connecting tape
Threaded hexagon spacer M2,5, sleeve length 11mm, female-female. The sleeve is made of brass
The expansion module is designed to work with Raspberry Pi 400 - a portable computer built into the keyboard. The board has a 40-pin connector in the pin position and two Qwiic connectors. SparkFun DEV-17512
Connecting ribbon with a length of 15 cm (40 wires), terminated on both sides with 2x20 pin female connectors. The cable can be used to connect Raspberry Pi with prototyping accessories (eg T-Cobbler Plus)
Adafruit 1148 - Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit, RoHS
Adafruit 801 - Adafruit Prototyping Pi Plate Kit for Raspberry Pi
The IO pin expansion module is designed for minicomputers Raspberry Pi 3, Raspberry Pi 4 and Raspberry Pi 400. It contains markings of all inputs and outputs of the minicomputer. DFRobot DFR0828
Prototyping kit dedicated to Raspberry Pi. It offers GPIO pin leads, a breadboard, buttons, LEDs and a buzzer. SB Components 11605
T-Cobbler adapter enabling connection of GPIO Raspberry Pi A +, B +, Pi 2, Pi 3, Pi 4 and Pi 5 lines to the breadboard (2.54 mm). Adapter assembled, included connecting tape
Adapter designed for Raspberry Pi minicomputers. It facilitates access to all pins, which are led out on the connector with a raster of 2.54 mm, which allows the use of a breadboard. SB Components 14927
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connector in a vertical position. Waveshare PI400-GPIO-ADAPTER-B
Mini pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and a set of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM300
Acrylic case with a place for the breadboard, designed for Raspberry Pi Zero W minicomputers. The user has free access to all minicomputer ports, including GPIO connectors
Adapter for connecting the GPIO line of the Raspberry Pi to the breadboard (2.54 mm). The set includes a connection tape. SparkFun BOB-13717
 No product available!
Expansion module designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has a 40-pin connector in a vertical position. SB Components 21239
Pin header goldpin black 2x40 pins. Straight connector for through-hole assembly. 2.54mm pitch
 
                    The adapter allows for prototyping using the GPIO connectors of Raspberry computers, and thanks to the IDC 40-pin tape it is possible to securely and securely connect the adapter with the RPI output