Aluminum case for Raspberry Pi 5 - black

A communication module based on the Raspberry Pi RP2040 microcontroller, designed for data transmission in the 868 MHz band. It supports point-to-point LoRa and LoRaWAN operation, offering long range and low power consumption. The board is equipped with six Crowtail interfaces, an integrated battery charging circuit, and the ability to be powered by a solar panel. Compatibility with the Arduino IDE and MicroPython makes it an ideal platform for building IoT nodes, weather stations, and environmental monitoring systems. Elecrow RA-08H LoRaWan Node

A practical adapter for the Raspberry Pi 5 that allows for quick and convenient docking of the CrowView Note. The adapter is plug-and-play, requires no driver installation, and supports Micro HD, Type-C, and USB-A ports. Power is supplied through the Type-C port, ensuring stable operation, while the compact and durable design makes it easy to carry and use on a daily basis. Elecrow Bridge Kit for CrowView Note

Dual PCIe 2.0 HAT module for Raspberry Pi 5 supporting NVMe M.2 storage and Hailo8 / Hailo8L AI accelerators. Seeed Studio 103110064

HAT-type module with a PCIe interface for Raspberry Pi 5, enabling connection of an NVMe M.2 drive or a Hailo8 / Hailo8L AI accelerator. Seeed Studio 103110063

Bonnet-type module for Raspberry Pi that enables connection of e-paper displays with a 24-pin FPC connector, featuring user buttons, a STEMMA QT connector and a 3W I2S audio amplifier. Adafruit 6418

This modern development board features a dual-core Cortex-M33 microcontroller clocked at 150 MHz, 520 KB of RAM, and 8 MB of QSPI Flash. It features a rich set of interfaces, including I2C, SPI, UART, 24 PWM channels, and an HSTX port for high-speed differential data transfer. The board features a STEMMA QT connector, a built-in 200 mA+ LiPo charger, a USB-C port with a UF2 bootloader, and NeoPixel LEDs and a red LED for signaling. The Feather RP2350 is compatible with MicroPython, CircuitPython, Arduino, and C/C++. Adafruit 6000

Pimoroni Pico LiPo 2 PIM775 is an advanced development board with the RP2350B, 16 MB of flash memory and 8 MB of PSRAM, created with battery-powered projects in mind. Thanks to the Qw/ST, SP/CE and JST connectors and the built-in LiPo charging system, it enables quick prototyping of mobile devices and remote IoT systems.

Pimoroni Pico LiPo 2 XL W PIM776 is an extended development board with the RP2350B, offering Wi-Fi and Bluetooth connectivity, 16 MB of flash memory and 8 MB of PSRAM. Thanks to its 40 GPIO pins, integrated LiPo charging system and numerous interfaces, it works well in advanced IoT projects and battery-powered systems.

A modular control platform based on the RP2040 microcontroller, designed for advanced robotics and engineering projects. It can simultaneously support up to six high-power modules, such as motor, servo, and LED lighting controllers. Power is supplied via an XT30 connector, ranging from 5 to 17 V, with built-in current and voltage protection. It supports MicroPython programming. Pimoroni PIM687

HAT+ module intended for Raspberry Pi 5 enabling power supply via Ethernet in the PoE standard and connection of an M.2 NVMe drive via the PCI Express interface. Waveshare 31536

Base board with dual Ethernet interfaces for Raspberry Pi Compute Module 5, designed for integration with 4G and 5G cellular modems and for networking and industrial applications. Waveshare CM5-DUAL-ETH-4G/5G-BASE

Development board based on the RP2350A microcontroller with a 1.85-inch round capacitive LCD touch display at 360 x 360 resolution and 65K colors, supporting ARM Cortex-M33 and RISC-V architectures, comes with a speaker box, designed for user interfaces and embedded systems. Waveshare RP2350-Touch-LCD-1.85C-BOX-EN

Development board based on the RP2350A microcontroller with a 1.85-inch round capacitive LCD touch display at 360 x 360 resolution and 65K colors, supporting ARM Cortex-M33 and RISC-V architectures, supplied with a speaker enclosure and a 3.7 V lithium battery. Waveshare RP2350-Touch-LCD-1.85C-BOX

Development board based on the RP2350A microcontroller with a 1.85-inch round capacitive LCD touch display at 360 x 360 resolution and 65K colors, supporting ARM Cortex-M33 and RISC-V architectures, designed for user interfaces and embedded systems. Waveshare RP2350-Touch-LCD-1.85C

3.5-inch DSI capacitive touchscreen with IPS panel, 5-point multi-touch support, and 480 × 800 resolution, designed for boards from the Raspberry Pi series. Waveshare 3.5inch DSI LCD (H)

A complete educational kit for learning electronics and programming using the Raspberry Pi Pico W, based on the plug-and-play principle. It offers 12 built-in modules, numerous Grove ports, and support for CircuitPython, allowing you to quickly create projects with sensors, motors, servos, and user interfaces. The included step-by-step guide makes learning easy, even for beginners, both at home and in school. The kit is ideal for STEM education and DIY projects, offering great flexibility and room for expansion. Cytron EDU-PICO-NB