Socket DIP08 regular 0.3"

HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometers and microphones. Digilent 6069-410-004

HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometer and microphone. Two coaxial cables are included. Measurement Computing MCC 172

High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007

The expansion board with the LoRaWAN SX1302 and GNSS L76B module is dedicated to Raspberry Pi minicomputers. The kit includes the 868M antenna, GPS and necessary cables. Waveshare SX1302 LoRaWAN Gateway HAT

The module with the LoRaWAN ASR6501 system and an external antenna, designed for the M5Stack sets. M5Stack U117

The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway

Alkaline battery A27 12V 7.6x27.3 mm with a capacity of 25 mAh

Black ABS ESD filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy ABS ESD Black

100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 1.14 mm

ToF distance sensor module based on the VL6180X system. It offers a range of 2 to 50 cm and communicates via the I2C interface

Graphic display 128 x 64 pixels, 68.7 x 48.5 mm, Type: COG, FSTN, reflective (without backlight), ST7565R. Artronic LCD-AG-C128064CF-FGN NO/-E6

A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a BC2 tip

Pmod cable set consisting of a 2x6 pin adapter to a double 6 pin connector and a 2x6 pin extension cable. Digilent 240-021-12

Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56

Adapter dedicated to the XGecu T56 universal memory programmer. Allows memory support in the BGA64 package

3DDescriptionprinter with the function of auto-leveling the bed, resuming printing and filament sensor. A kit for self-assembly. Anet ET4