- Out-of-Stock
AVT5255 A +
ID: 190042
LOW LEVEL METER - PLATE AND PROGRAMMED LAYOUT
LOW LEVEL METER - PLATE AND PROGRAMMED LAYOUT
Producer: AVT
Liquid level measurement can be carried out by various methods in which mechanical or electronic sensors are used. Simple to use is the use of electrodes between which an alternating current flows. Ultrasound sensors or liquid pressure readings are less common. However, the latter method is relatively simple to implement - this solution was used in the presented set.
The meter uses the principle that the pressure exerted on the bottom of the vessel is proportional to the height of the liquid column. For reading, a differential pressure sensor was used, connected by a tube to the vessel being monitored. The rest is taken care of by the PSoC processor.
The device is particularly recommended when it is necessary to monitor the liquid level - especially non-conductive
Selected parameters:
- measuring range of the meter depends on the sensor used (for MPX4250DO resolution 1cm, measuring range 0-5m water column)
- reading on matrix LCD display
- presentation of the result in numerical form and a bargraph
- power supply - 12Vdc
- a printed circuit board, programmed layout and documentation in the set
A version with a set of independent components is available
A detailed description in EP 9/10
Download
190042
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Low cost programmer for STM32 and STM8 microcontrollers fully compatible
with the ST-Link V2
Retired
No product available!
WiFi module dedicated to Coral Dev Board Micro. It uses the Murata LBEE5HY1MW chip and connects to the base board via B2B connectors. Coral G650-07974-01
Retired
No product available!
M12 mount lens. It has a focal length of 1.3 mm and an FoV of 185°. It is designed to work with the Raspberry Pi camera. ArduCAM U6053
Retired
No product available!
Universal charger for 1-8S Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It has a built-in function of generating and measuring PWM, PPM and S.BUS signals. ToolkitRC M8S
Retired
No product available!
Universal 150 W charger for 1-6S Li-Ion, LiPo, LiFe, LiHV, Pb, Ni-Cd and Ni-MH batteries. It has a built-in function of generating and measuring PWM, PPM and S.BUS signals. ToolkitRC M6 V2 Black
Retired
No product available!
AC/DC power adapter with a power of 180 W and an output voltage of 19.5 V. It is equipped with an output with an XT60 plug and is designed for universal chargers with an XT60 connector, e.g. ToolkitRC M6. ToolkitRC ADP180
Retired
No product available!
An electric precision screwdriver with the option of manual or automatic operation. The screwdriver is equipped with an OLED display and a built-in rechargeable battery that provides up to 6 hours of use. MiniWare ES15
Retired
No product available!
Color LEDs 4 mm, which is a solution between "ordinary" LEDs and fully addressable LEDs. The user cannot address every LED in the chain, but can change the color and mode of all LEDs in the chain. SparkFun COM-21209
Retired
No product available!
An isolated DC-DC converter that can be powered from 36 to 72 V DC and supplies 5 V DC and up to 20 A. The device is supplied in an IP65 enclosure. SparkFun COM-18733
Retired
No product available!
Universal power adapter 5.0V / 2.0A 10W 3.5 x 1.35 mm 1.5m. Akyga AK-TB-14
Retired
No product available!
Universal power adapter 5.0V / 2.0A 10W 5.5 x 2.5 mm 1.5m. Akyga AK-TB-13
Retired
No product available!
No product available!
No product available!
Wall charger Akyga AK-CH-06 10W USB-A 5V / 2.1A black. Akyga AK-CH-06
Retired
No product available!
A 16-channel voltage recorder with a sampling rate of up to 1 MS/s. Connects to a computer via USB2.0 and works with PicoLog 6 software. Picolog 1216
Retired
No product available!
Bosch Sensortec\'s BME688 development kit enables testing of applications based on temperature, barometric pressure, humidity, and gas detection. The first AI-enabled environmental sensor, the BME688 can distinguish between different gas compositions by analyzing their "electronic fingerprints." The kit is configurable using BME AI-Studio software, which optimizes performance and power consumption, and the eight-sensor board enables testing of multiple configurations simultaneously. SparkFun DEV-19630
Retired
No product available!
LOW LEVEL METER - PLATE AND PROGRAMMED LAYOUT