- Out-of-Stock
Easy MP3 Shield - module with MP3 player for Arduino
ID: 578527
Audio player with built-in MP3 codec and microSD card slot. It communicates via the UART interface or is controlled by 3 buttons on the board. Cytron SHIELD-EZMP3
Description
EasyMP3 Shield is an Arduino frontend that provides integrated MP3 hardware decoding. Offers the ability to decode and play MP3 audio files from mass storage drives. The board has a 2-channel amplifier for direct control of external speakers and a stereo audio jack for connecting headphones. The module communicates via the UART interface, through which you can control the playback of the song and increase or decrease the volume. Besides, the user can use 3 buttons which allow the basic functions of the MP3 player to be performed directly. EasyMP3 Shield comes with a microSD slot that is used to store MP3 and WAV files. The overlay is also equipped with a USB MicroB socket that allows the user to connect the overlay to a computer and manage files. The GitHub repository includes a library with the module's manual.
Features
- Support for WAV and MP3 decoding
- 24-bit DAC output, support 90dB dynamic range, SNR supports 85dB
- Jumper switches for communication
- POWER and BUSY LED indicators
- 3.5mm stereo audio jack
- 2-channel 3 W amplifier for an external loudspeaker
- USB Micro-B slot for MicroSD card reader function
- ThumbDrive slot, maximum 32 GB flash drive support
- MicroSD card slot, supports FAT16, FAT32 file system, maximum support 32GB MicroSD card
- 3 buttons for the basic functions of the player
Kit contains
- Shield EasyMP3
- 2 x jumper
578527
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 16
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 226
Available
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł35.42
24h
Available quantity: 7
Available
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
zł57.75
24h
Available quantity: 3
Available
Other products in the same category (16)
Needle bending needle, for precise glue application, Flux 0.25mm internal diameter and 0,5144mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,26mm internal diameter and 0,4636mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,21mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.81mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Silicone protective case for the Huskylens vision module. It was made of a soft and flexible material, it perfectly fits the shape of the tile. DFRobot FIT0647
Retired
No product available!
Module with a CCS811 air quality sensor for measuring the concentration of carbon dioxide (CO2) and volatile organic compounds (VOC) in the air. It communicates via the I2C interface. DFRobot SEN0339
Retired
No product available!
Evaluation kit with SiFive Freedom E310 microcontroller with RISC-V (ISA) architecture. It includes 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 microcontroller for USB support and JTAG interface, Qwiic and USB Type-C connector. SparkFun DEV-15594
Retired
No product available!
Cable with a length of 150 mm, on one side terminated with a Qwiic connector, and on the other side with single female goldpin connectors. It allows you to connect Qwiic modules, e.g. with development board. SparkFun CAB-14988
Retired
No product available!
Extension module for Raspberry Pi designed to build the user interface. It is equipped with a 2.4-inch TFT LCD display, microphones, speaker, buttons, joystick and RGB LEDs. SparkFun DEV-16653
Retired
No product available!
Adapter board from SODIMM200-2.5 to 2.54mm connectors
Retired
No product available!
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601
Retired
No product available!
Evaluation kit with LittleBee GW1N-1 FPGA chip. Offers 1152 LUTs and 864 Flip-Flops (FF). The board has an FPC connector for the display and a USB type C. Sipeed Lichee Tang Nano
Retired
No product available!
Video splitter for connecting one input device to 2 receivers. Maximum 4K resolution supported. Lanberg SPV-HDMI-0002
Retired
No product available!
Video splitter for connecting one input device to 4 receivers. Maximum 4K resolution supported. Lanberg SPV-HDMI-0004
Retired
No product available!
Video splitter for connecting one input device to 8 receivers. Maximum 4K resolution supported. Lanberg SPV-HDMI-0008
Retired
No product available!
Video switch that allows you to connect 5 input devices to one HDMI receiver. The input signal can be selected using a button on the casing or the included remote control. Lanberg SWV-HDMI-0005
Retired
No product available!
Audio player with built-in MP3 codec and microSD card slot. It communicates via the UART interface or is controlled by 3 buttons on the board. Cytron SHIELD-EZMP3