- Out-of-Stock
A DIY lighting kit that lets you control both the main light and lighting effects. The kit includes a 7-channel control board and five flexible, ultra-narrow COB LED strips that emit 6500K cool white light. The module supports unidirectional and bidirectional designs, ensuring stable LED current control and easy integration with XIAO boards. Seeed Studio E25121201
COB LED DIY Kit for Seeed Studio XIAO is a complete lighting kit for DIY projects, designed specifically to work with Seeed Studio XIAO boards. The kit is based on a 7-channel control board that allows efficient management of GPIO currents, enabling control of a series of low-voltage, ultra-narrow 1 mm COB LEDs. With an integrated PMIC for battery management, the kit is ready to use in compact, high-brightness wireless lighting systems. The kit includes five different types of flexible COB LED strips, allowing adaptation to various projects and layouts. The control board offers 3 high-current channels (300 mA) for main lighting and 4 low-current channels (80 mA) for effects such as smooth dimming or “breathing,” providing full control over both primary light and dynamic effects on a single board.

The LED strips are made from flexible FPC and phosphor silicone, with an ultra-narrow 1 mm width, emitting 360° cool white light (6500K) with CRI>80, ensuring accurate color rendering and smooth, linear light. The kit supports both unidirectional and bidirectional projects – single terminals simplify installation in tight spaces, while double terminals provide uniform voltage and brightness distribution. Power can be supplied via 5V/1A USB connected to XIAO, and for full load, a 5V/2A wall adapter or 3.7V Li-Po battery is recommended. The board features a power switch, power LED indicator, battery connector, and Grove I²C connector. The kit is compatible with many XIAO models, including RP2040, RP2350, nRF52840, ESP32-C3/C6/S3, RA4M1, and MG24. It ensures safe LED current control, stable operation, and easy integration into DIY projects such as mini neon lights, saber lighting effects, artistic installations, or smart home lighting.
Manufacturer
Responsible person
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
The Seeed Xiao ESP32-C6 is a compact module with support for WiFi, Bluetooth, Zigbee, and Thread, making it ideal for Matter-compatible Smart Home applications, offering advanced features and low power consumption.
Compact development board with Renesas RA4M1 microcontroller, ARM Cortex-M4 48 MHz core, 256 KB Flash and 32 KB SRAM, ideal for advanced applications. It offers 19 GPIO, 14-bit ADC, 12-bit DAC, CAN BUS, USB 2.0, RGB LEDs and advanced AES128/256 encryption, and is characterized by low power consumption and small dimensions of 21 x 17.8 mm. Seeed Studio 102010551
A compact development board based on the Raspberry Pi RP2350, which combines two ARM Cortex-M33 cores with two Hazard3 RISC-V cores to provide high performance and enhanced security features. With ultra-low power consumption and a battery management system (BMS), it is ideal for battery-powered projects such as wearables and smart controllers. The board offers a wide range of interfaces, support for MicroPython, C and C++, and compatibility with the XIAO ecosystem, making it an excellent choice for prototyping and mass production. Seeed Studio 102010550
Development board with Nordic nRF52840 chip and floating point unit (FPU), enriched with 9 additional GPIO pins in SMD format, ideal for advanced Bluetooth 5.0 and NFC projects. Thanks to its compact size, low power consumption and compatibility with Arduino, MicroPython and CircuitPython, it is perfect for IoT projects, wearable devices and SoM modules. Seeed Studio 102010672
No product available!
ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently
No product available!
Miniature ESC type controller for a DC motor with an input from 3.7 V to 5 V. Offers an additional output current of up to 1.5 A and allows you to control the motor in a channel mixing device
No product available!
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico
No product available!
Serial port to Ethernet converter module based on the ESP32 series from Wireless-Tag. It integrates an optimized TCP/IP protocol stack and is characterized by extremely high performance, stability, versatility and reliability. WT32-ETH01-PIN
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. Communicates via USB interface. Waveshare Thermal USB Camera
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico M
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus M
No product available!
Module with an IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels dedicated to Raspberry Pi Pico boards. It uses the DVI interface for communication. Waveshare PICO-DVI-7inch
No product available!
A kit that allows you to add connectivity to devices at home or in the workplace. It consists of Arduino MKR WiFi and the MKR IoT Carrier base board and contains a complete set of 8 Internet of Things projects, ready for self-assembly. Arduino AKX00026
No product available!
Module with a 2 MP camera equipped with an IMX390 sensor. It has a built-in manually adjustable focus. The set includes a USB 3.0 adapter, a tripod and a cable. ArduCAM B0476
No product available!
A set with four IMX708 cameras with a resolution of 12 MP and a Camarray HAT expansion module for Raspberry Pi, which allows you to simultaneously connect four cameras to a minicomputer. ArduCAM B0484
No product available!
Water-based paint that can conduct electricity. It allows you to paint wires on various objects, such as models, clothes, furniture, walls. Standard acrylic or water-based paints can be used with Electric Paint to act as insulation or create multi-layer circuits. It is black and packed in easy-to-use 10 ml sachets. SparkFun COM-22958
No product available!
Matrix display module with a Raspberry Pi Pico W control board. It has built-in 1024 RGB LEDs in a 32x32 arrangement, an amplifier with a speaker and buttons. Perfect for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM670
No product available!
A DIY lighting kit that lets you control both the main light and lighting effects. The kit includes a 7-channel control board and five flexible, ultra-narrow COB LED strips that emit 6500K cool white light. The module supports unidirectional and bidirectional designs, ensuring stable LED current control and easy integration with XIAO boards. Seeed Studio E25121201