- Out-of-Stock
zł269.01
Filament ROSA3D PET-G Standard 1.75mm Gold Metallic
ID: 1181637
5907753132246
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gold Metallic
Description
1.75 mm PET-G filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PET-G Standard dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The PET-G Standard filament is made of raw materials that are approved for contact with food.
Features
- Color: Gold Metallic
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 260°C
- Bed temperature: 60°C to 80°C
- Density: 1.29 g/cm3
- Odorless: smell
- Elongation at tensile 5.5%
- Tensile strength (to break) 47 MPa
- Tensile modulus is 2980 MPa
- Impact strength according to the Izod method with a notch of 4.7 kJ/m2
- Vicat softening point 78 °C
- Net weight: 0.8 kg
1181637
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Złoty
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.02
24h
Available quantity: 100
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł54.30
24h
Available quantity: 239
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł48.87
24h
Available quantity: 246
Available
Other products in the same category (16)
Starter board LPCXpresso18S37 with LPC18S37 microcontroller (Cortex-M3). The set is equipped with a built-in programmer, buttons, diode, SPI Flash quad flash and USB - UART konwetrer
Retired
No product available!
Aluminum extensometer beam, allowing weight measurement up to 100 kilograms. It has four wires. It is used in kitchen scales and portable scales, max 100 kg, 20x23x94, 21 cm cable, RoHS
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool. XF-ABS-175-GRAY
Retired
No product available!
The DDS generator with a readable alphanumeric display allows you to generate sinus, rectangular or triangle waveforms. The device can also be used for frequency measurement in the 1Hz-60MHz range
Retired
No product available!
ZigBee development/evaluation kit designed for CC2530F256
Retired
No product available!
No product available!
Motor Control Shield, drives DC Motors & Stepping Motors
Retired
No product available!
EMW3162 WIFI Shield consists of a base plate and WiFi module EMW3162. Works with Arduino and STM32 Nucleo. Built-in USB-UART converter
Retired
No product available!
Music Shield for Arduino Development, Audio Play/Record, VS1053B Onboard
Retired
No product available!
BB Black Expansion CAPE, Supports Arduino, Compatible with UNO (default) and Leonardo (by configuration)
Retired
No product available!
100-MSPS USB Oscilloscope, Logic Analyzer and Variable Power Supply. 410-321
Retired
No product available!
100-MSPS USB Oscilloscope, Logic Analyzer and Variable Power Supply. 410-321
Retired
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 18.75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1200 counts per revolution of the gearbox’s output shaft. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.
Retired
No product available!
SanDisk micro SDHC memory card with a capacity of 16 GB, a maximum write speed of 12 MB / s, a maximum reading speed of 18 MB / s.
Retired
No product available!
GoodBrand CUBE Blue Pendrive with 8 GB capacity equipped with USB 2.0 interface. Maximum read speed: 22 MB / s, maximum write speed: 10 MB / s
Delivery date unknown
No product available!
Intenso Pendrive with a capacity of 32 GB equipped with a USB 2.0 interface. Maximum read speed: 28 MB / s, maximum write speed: 6 MB / s
Delivery date unknown
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gold Metallic