- Out-of-Stock
Arducam IMX219 Wide Angle NoIR IR sensitive Camera - wide angle camera module for Raspberry Pi
ID: 586822
8 Mpx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0194
Description
Module with IMX219 sensor intended for use as a spare element on the RPI Camera Board V2. The sensor used has an 8 Mpx matrix and allows video recording at resolutions 30fps @ 8MP, 60fps @ 1080p, 180fps @ 720p.
The module requires an RPI Camera Board V2 board to be connected to Raspberry Pi or Nvidia Jetson Nano minicomputers through a dedicated socket located on the top of the board. The module uses the MIPI CSI-2 interface specially developed for cooperation with cameras.
Attention!
The set does not include the RPI Camera Board V2 board necessary to start the camera.Features
- Works with all versions of Raspberry Pi or Nvidia Jetson Nano - RPI Camera Board V2 is required for connection
- Matrix: IMX219
- Resolution: 8 Mpx
- Optical size: 1/4 inch
- Viewing angle: 175 (D) x 155 (H) x 115 (V)
- EFL: 2.5mm
- F.NO: 2.8
- ADC resolution: 10-bit
- Output interface: 2-line/4-line MIPI serial output
- Output formats: 8/10-bit BW RAW
- No IR filter
586822
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- No
- Lens assembly
- M12/CS mount
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60, and 640x480p90 video
zł79.90
24h
Available quantity: 7
Available
Flex Cable for Raspberry Pi Camera - 100mm / 4"
zł2.90
24h
Available quantity: 495
Available
Flex Cable for Raspberry Pi Camera - 200mm / 8"
zł2.90
24h
Available quantity: 211
Available
Flex Cable for Raspberry Pi Camera - 300mm / 12"
zł4.31
24h
Available quantity: 27
Available
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
zł3.03
24h
Available quantity: 29
Available
100cm flexible cable (tape) for connecting the camera module to Raspberry Pi computers. The tape has 15 wires and 1mm pitch
zł8.19
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
24h
Available quantity: 90
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
24h
Available quantity: 8
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł528.00
24h
Available quantity: 148
Available
Other products in the same category (16)
The device allows the presence of devices with BLE in networks with Ethernet protocol, extends the range of sensors iNode Care Sensor
Retired
No product available!
A wireless energy consumption monitor with built-in memory, thanks to the analysis of daily consumption, can help reduce the cost of electricity consumption
Retired
No product available!
A wireless energy consumption monitor with built-in memory, thanks to the analysis of daily consumption, can help reduce the cost of water consumption
Retired
No product available!
Flex Cable for Raspberry Pi Camera - 200mm / 8". Adafruit 1647
Retired
No product available!
MYIR MYC-C7Z010 is a single board module based on the MYC-C7Z010 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
Retired
No product available!
No product available!
AVT kit for self-assembling LEDs, contains a set of elements. AVT1844 B
Retired
No product available!
Assembled AVT set, Christmas, shining Christmas tree LED. AVT1844 C
Retired
No product available!
The sensor detects dangerous carbon monoxide and carbon monoxide, signals a gas leak and the presence of carbon monoxide in rooms. URZ0409
Retired
No product available!
Female-female 10-core connection cable, 15 cm long with connectors of 1.27 mm pitch. Adafruit 1675
Retired
No product available!
32GB microSDHC Memory Card with SD Adapter, class 4, Kingston
Delivery date unknown
No product available!
Development kit chipKIT DP32 equipped with PIC32MX250F128B microcontroller (40/50 Mhz, 128 kB Flash, 32 kB RAM), prototype area with solder pads, potentiometer, 4 LED diodes, 2 buttons and soldering pads for EEPROM memory and analog temperature sensor. Digilent 410-280P-KIT
Retired
No product available!
large 14x21 hole prototyping area on an expansion card compatible with the myRIO Expansion Port (MXP). 6002-210-008P
Retired
No product available!
Perfect for connecting devices using Wi-Fi, Ethernet and Power over Ethernet options, the Yun combines an ATmega32u4 microcontroller with a Linux based Linino WiFi System on Chip module. A000003
Retired
No product available!
LPCXpresso4337 starter board with a dual-core LCP4337 microcontroller (Cortex-M4F + Cortex-M0 +). The set is equipped with a built-in programmer, buttons, diode, SPI Flash quad flash and USB - UART konwetrer
Retired
No product available!
Starter board LPCXpresso18S37 with LPC18S37 microcontroller (Cortex-M3). The set is equipped with a built-in programmer, buttons, diode, SPI Flash quad flash and USB - UART konwetrer
Retired
No product available!
8 Mpx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0194