- Out-of-Stock
STO1152E - Micsig portable Smart oscilloscope
ID: 1182274
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 150 MHz band, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO1152E
Description
The Micsig Smart Series oscilloscope is a digital oscilloscope with an 8-inch LCD display and a touch screen. The device has two measurement channels and is characterized by good measurement parameters: 150 MHz band, sampling rate 1 GSa/s and memory buffer 70 Mpts. It has numerous outputs for connecting to another device via USB (Host and Device), HDMI, LAN and WiFi. In addition, the oscilloscope is equipped with a power connector and a 7500 mAh battery that allows you to work up to 5 hours on one charge. The housing also has a stand enabling the oscilloscope to be positioned at an angle of 45° in a convenient way.
One of the most interesting features of the device is the built-in 31 types of automatic measurements. The user can choose one of 31 quantities measured automatically. The "Measure" tab displays all measurement options on one screen - just touch the desired measurement type to select it. In addition, the device supports 7 trigger modes, which allows you to customize the measurement method to suit your needs.
The oscilloscope has 8 GB of built-in memory, thanks to which the user can store screenshots directly on the device, and the built-in quick write function significantly simplifies and simplifies the process of data recording.
The oscilloscope also provides applications available for PCs and mobile devices with Android and iOS. This allows you to conveniently use the device remotely.
The set with the device comes with BNC probes, power supply and accessories to facilitate operation with the oscilloscope.
Features
- Band: 150 MHz
- Channels: 2
- Sampling rate: 1 GSa/s
- Memory buffer: 70 Mpts
- Capture speed up to 130,000 wfm/s
- Bandwidth limitation: 20 MHz, high pass, low pass
- Outputs: Wi-Fi, LAN, HDMI, USB Host, USB Device, GND, DC power supply, trigger output
- Display:
- 8" TFT LCD
- Resolution 800x600 pixels
- Display range 14x10
- Capacitive touch screen
- Built-in 8 GB memory, waveforms and screenshots can be viewed and edited in the oscilloscope
- Android and iOS applications and PC for remote control
- Battery: 7500 mAh (working time up to 5 hours)
- Dimensions: 280 x 180 x 50 mm
Kit contains
- Micsig STO1152E
- 2 x BNC probe
- Power Supply
- Power plug
- 3 x BNC colorful protective cap
- Protective foil
1182274
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Protective handbag designed for Micsig oscilloscopes of the TO, ATO and STO series.
zł620.01
Delivery date unknown
No product available!
Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A
zł1,450.00
Delivery date unknown
No product available!
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 100 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP1003B
zł5,120.00
Delivery date unknown
No product available!
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł870.00
24h
Available quantity: 1
Available
Other products in the same category (16)
Camera with a resolution of 5 MPx with a USB interface in a metal case. Equipped with an OV5648 CMOS sensor with a wide angle lens with a 90° angle of view. ArduCAM UB023301
Retired
No product available!
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMS179 sensor with a wide-angle lens with a viewing angle of 150°. ArduCAM UB0233
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Juicy Green
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Glow in the Dark Green
Retired
No product available!
Adapter with a set of connectors specific to the Raspberry Pi 3 Model B/B+. It allows you to adapt the Raspberry Pi CM4 modules to projects based on Pi 3 model B/B+. Waveshare CM4-to-Pi3-Adapter
Retired
No product available!
Convenient to use retractable 3in1 USB cable with USB A plug and three output connectors: microUSB, USB Type C and Lightning
Retired
No product available!
Convenient to use retractable 3in1 USB cable with USB A plug and three output connectors: microUSB, USB Type C and Lightning
Retired
No product available!
Wall charger with built-in USB type-C cable. The maximum current generated by the charger is 3.1 A. eXtreme NTC31C
Retired
No product available!
Audio cable with 3.5 mm 3-pin minijack plugs and 3 x RCA (chinch) 0.24 m long
Retired
No product available!
Module with a black and white e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Dedicated for Raspberry Pi Pico and Pico W. Pimoroni PIM634
Retired
No product available!
Development kit with Xilinx Spartan 3A FPGA. Equipped with a display, buttons, audio and video output and a microSD slot. Numato Lab FPGAX0006
Retired
No product available!
Development kit with Xilinx Spartan-6 FPGA. Equipped with displays, buttons, audio and video outputs and a breadboard. Numato Lab WXDE001
Retired
No product available!
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (with case) (EU)
Retired
No product available!
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (EU)
Retired
No product available!
The set with the RM500Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-AE 5G HAT (with case) (EU)
Retired
No product available!
The set with the RM500Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-AE 5G HAT (EU)
Retired
No product available!
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 150 MHz band, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO1152E