ROSA3D ReFill PLA Starter Filament 1.75mm Blue Sky

Description

1.75 mm PLA filament for 3D printing by ROSA3D. 1 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.

The filament was placed on a cardboard coil manufactured using only certified bio-friendly eco-friendly adhesives. The shape of the coil is stable and guarantees satisfaction. In order to use the filament, it is necessary to print two reusable discs, which must be pressed into the refill thimble.

Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.

PLA is the basic material used in 3D printing. PLA Starter is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food.

Features

• Color: blue sky
• Diameter: 1.75 mm
• Diameter tolerance: +/- 0.05mm
• Oval tolerance: +/-  0.02 mm
• Printing temperature: 185°C to 225°C
• Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
• Density 1.24 g/cm3
• Odorless smell
• Elongation at tensile 6%
• Tensile strength (to break) 53 MPa
• Modulus of elasticity at tensile 3500 MPa
• Heat deformation temperature 55°C
• Net weight: 1 kg