.png)
- Out-of-Stock
Nanovna V2 4" - 4.4GHz VNA vector network analyzer
ID: 1186045
5902186304109
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"
Description
2-port vector network analyzer that can measure from 50kHz to 4.4GHz. It offers a dynamic range of up to 90 dB at a frequency of up to 1 GHz and up to 80 dB at a frequency of 3 GHz. It offers a cycle speed of up to 401 points/s, allows you to determine S-parameters, amplitude and phase parameters, as well as quickly and accurately determine damage in coaxial cables. It will be used when analyzing antennas, amplifiers, wires and filters.
The VNA has a built-in 4" LCD display with a touch screen. The built-in lithium battery ensures portability of the device and is charged via the USB micro B connector. It is compatible with Linux, Windows (7+) and MacOS.
Features
- 2-port vector network analyzer
- Frequency Range: 50kHz to 4.4GHz
- Typical dynamic range: 90 dB (up to 1 GHz), 80 dB (up to 3 GHz)
- Number of points per cycle: 401
- 4" LCD display with touch panel
- 3.7V 3200mAh battery
- Charging and communication connector: USB micro B
- Metal housing
Kit contains
- Nano V2 4"
- 2 x M-M cable 30cm
- Calibration kit
- USB cable
1186045
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nano V2 2.8"
zł442.39
Delivery date unknown
No product available!
Other products in the same category (16)
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
Retired
No product available!
An e-Paper display driver for the Raspberry Pi with the IT8951 chip, which provides smooth and efficient management of content display on e-Paper screens. It supports various communication interfaces, such as USB, SPI, and I80. Waveshare e-Paper Driver HAT
Retired
No product available!
Test probe tip with 500X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP500-2
Product available on request. Please send your inquiry to the following address: [email protected]
Retired
No product available!
The 12V axial DC fan with dimensions of 80x80x15mm offers a capacity of 62.86m3/h at a speed of 3000 rpm. Made of thermoplastic, it operates at temperatures from -10°C to 70°C and is characterized by a low noise level of 34.7dBA. Sunon EE80151S1-000U-A99
Retired
No product available!
ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently
Retired
No product available!
Miniature ESC type controller for a DC motor with an input from 3.7 V to 5 V. Offers an additional output current of up to 1.5 A and allows you to control the motor in a channel mixing device
Retired
No product available!
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico
Retired
No product available!
Serial port to Ethernet converter module based on the ESP32 series from Wireless-Tag. It integrates an optimized TCP/IP protocol stack and is characterized by extremely high performance, stability, versatility and reliability. WT32-ETH01-PIN
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus
Retired
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
Retired
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. Communicates via USB interface. Waveshare Thermal USB Camera
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico M
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus M
Retired
No product available!
Module with an IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels dedicated to Raspberry Pi Pico boards. It uses the DVI interface for communication. Waveshare PICO-DVI-7inch
Retired
No product available!
Module with a 2 MP camera equipped with an IMX390 sensor. It has a built-in manually adjustable focus. The set includes a USB 3.0 adapter, a tripod and a cable. ArduCAM B0476
Retired
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"