- Out-of-Stock
Development board with ESP32-P4 and ESP32-C6, Wi-Fi 6, Bluetooth 5, 32 MB PSRAM and Ethernet - Waveshare 32054
ID: 1201090
5902186330351
ESP32-P4-WIFI6-DEV-KIT is an advanced development board with ESP32-P4 and ESP32-C6, designed for multimedia applications, HMI systems, edge data processing and IoT with support for Wi-Fi 6 and Bluetooth 5. It supports a camera, DSI display, Ethernet and audio and enables expansion through GPIO and PoE connectors.
Description
ESP32-P4-WIFI6-DEV-KIT is a high-performance development board based on the ESP32-P4 chip with a dual-core RISC-V processor and a supporting ESP32-C6 chip providing Wi-Fi 6 (2.4 GHz) and Bluetooth 5/BLE communication via the SDIO interface. The ESP32-P4 module has 32 MB PSRAM and 16 MB Flash memory, as well as a number of integrated peripherals, which allows the board to be used in HMI applications, edge processing systems, audio and multimedia applications with a high level of security.
The board includes MIPI-CSI and MIPI-DSI interfaces for camera and display support, a 100 Mb/s Ethernet port, USB OTG 2.0 (HOST/DEVICE) connectors, a microSD card slot (SDIO 3.0), I2C, I3C, RTC interfaces, a 3.5 mm audio jack, microphone and speaker connector (8 Ω, 2 W). A 40-pin GPIO header enables expansion with external modules. The board also supports power supply through PoE (via connector for an external PoE module, not included).
Integrated security mechanisms include Secure Boot, Flash memory encryption and cryptographic accelerators, allowing the development of IoT systems resistant to attacks.
Properties
- ESP32-P4 with 400 MHz RISC-V processor (dual-core), 32 MB PSRAM, 16 MB Flash
- ESP32-C6 for Wi-Fi 6 and Bluetooth 5/BLE communication (SDIO interface)
- Interfaces: USB OTG 2.0 (HOST/DEVICE), 100 Mb/s Ethernet, MIPI-CSI, MIPI-DSI, TF (microSD, SDIO 3.0), I2C, I3C
- 5 MP camera (OV5647) and DSI displays up to 10.1″ supported via MIPI interfaces
- Microphone, speaker connector (MX1.25, 8 Ω 2 W), 3.5 mm audio jack output
- Power via USB-C or optional PoE module
- 40-pin GPIO header, 28 programmable I/O pins
- RTC support with rechargeable backup battery connection
- Integrated security mechanisms: Secure Boot, Flash Encryption, TRNG, access control
- Board dimensions: 85 × 56.5 mm
Included
- ESP32-P4-WIFI6-DEV-KIT x1
- 8 Ω 2 W speaker x1
- SH1.0 4-PIN cable ~150 mm x2
1201090
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
Retired
No product available!
Digital Proximity, Ambient Light, RGB and Gesture Sensor, Avago Technologies, RoHS
Retired
No product available!
Integrated analogue base station RFID (front-end) of the company EM Microelectronic with a frequency of 13.56MHz. The system has a SOP20 housing
Retired
No product available!
Computer fan housing Raspberry Pi 3, Raspberry Pi 2 model B and Raspberry Pi 1 model B + in dark blue plastic color
Retired
No product available!
Case for the Raspberry PI 2 model B, Raspberry PI 1 model B+ and Raspberry PI 3 computers, manufactured from high quality acrylic. CLEAR
Retired
No product available!
No product available!
No product available!
No product available!
Infrared sensor that allows measurement of distances up to 15cm, has a built-in infrared illuminator, IR receiver and a perimeter of the received signal
Retired
No product available!
Miniature (22x13.5x6mm) WiFi module b / g / n with TCP and UDP protocols operating in standalone and access point modes. 2.0mm goldpin connector. The module is equipped with a UART interface, it is also possible to control GPIO lines (also as PWM). Powered by 3.3V. Antenna: copper wire
Retired
No product available!
Ultra miniature WiFi b/g/n module, equipped with UART, SPI, PWM and GPIO interfaces. The ability to work as an access point and in standalone mode. 3.3V power supply.HF-LPT200-1
Retired
No product available!
This transducer is about 45mm in diameter and has 4Ω impedance and should be run at about 5W
Retired
No product available!
SPIRIT1 868 MHz low power RF module with integrated microcontroller
Delivery date unknown
No product available!
Read/Write analog front end for 125 kHz RFID Basestation, SOIC16, EM Microrlectronic, RoHS
Retired
No product available!
Bitscope Micro is a miniature measuring instrument with a USB interface, it can act as an 8-channel logic analyzer (40MS / s, 3.3V or 5V) or a 2-channel oscilloscope (bandwidth up to 20MHz). In addition, Bitscope can generate a clock signal as well as sinusoidal, triangular, rectangular and saws
Retired
No product available!
High performance WLAN USB module which enables the Raspberry Pi to connect to a Wi-Fi network
Retired
No product available!
ESP32-P4-WIFI6-DEV-KIT is an advanced development board with ESP32-P4 and ESP32-C6, designed for multimedia applications, HMI systems, edge data processing and IoT with support for Wi-Fi 6 and Bluetooth 5. It supports a camera, DSI display, Ethernet and audio and enables expansion through GPIO and PoE connectors.