- Out-of-Stock
Li-Po Battery Akyga LP401230 3.7V 110mAh PCM JST 2.54
ID: 1202727
5906574243285
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 110mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0474
Description
Akyga AKY0474 is intended for powering electronic devices operating at a nominal voltage of 3.7V. The LP401230 cell format provides a capacity of 110mAh and a very compact, flat construction, enabling installation in devices with limited internal space, such as portable electronics, miniature control modules, and embedded projects.
The integrated PCM protection circuit supervises charging and discharging processes, reducing the risk of damage caused by overcharging, deep discharge, short circuit, and overcurrent. The battery is connected via a 150mm lead terminated with a 2-pin JST 2.54 connector, allowing direct connection to development boards, power supply modules, and charging controllers. The AKY0474 model is used in consumer electronics, IoT systems, and electronic projects requiring very small Li-Po power sources.
Warning!
Before installation, read and follow the safety guidelines for lithium-polymer batteries. Improper use may result in damage to the battery!Features
- Battery type: lithium-polymer Li-Po
- Cell format: LP401230
- Nominal voltage: 3.7V
- Nominal capacity: 110mAh
- Configuration: 1S
- Number of cells: 1
- Protection circuit: PCM
- Rechargeable: yes
- Connector: JST 2.54 2-pin
- Cable length: 150mm
- Lead type: wires
- Application: powering electronic devices operating at 3.7V
Kit includes
- 1x Lithium-polymer Li-Po battery with cable and JST 2.54 2-pin connector
1202727
Data sheet
- Battery type
- Li-Po
Other - Output voltage
- 3.7V
- Battery capacity
- 110 mAh
- Battery configuration
- 1S
- Number of cells
- 1
- Output/Connector
- JST 2,54 mm
- Length
- 30 mm
- Width
- 12 mm
- Thickness
- 4mm
- Weight
- 4 g
Manufacturer AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
Responsible person AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
Other products in the same category (16)
Blue plastic case for Raspberry Pi 4B minicomputer. There is space for mounting a fan and a camera holder
Retired
No product available!
The case is designed for minicomputers Raspberry Pi 4 model B. It is made of aluminum and also serves as a large heat sink. Waveshare PI4-CASE-E
Retired
No product available!
The case is designed for minicomputers Raspberry Pi 4 model B. Made of ABS, has a built-in heat sink and cooling fan. Waveshare PI4-CASE-POLY-WITH-MINI-FAN-KIT
Retired
No product available!
The Uni-T non-contact thermometer is designed to measure the temperature of the human body. It allows you to measure the temperature in a non-invasive way in the range from 32°C to 42.9°C from a distance of 5 to 10 cm. Uni-T UT300H
Retired
No product available!
Kit with 16 modules and the IO Expansion Shield designed to work with the Arduino Uno. Dedicated to learning programming and electronics
Retired
No product available!
Development kit with ESP32 WiFi and Bluetooth module and 1.54 "ePaper display. Built-in IMU MPU6050 sensor and USB-UART converter. LilyGO TTGO T-Block ESP32
Retired
No product available!
Programmable watch with ESP32-Pico-D4. Equipped with a touch button display, motion sensor, power management system, RTC clock and Lithium battery. LILYGO TTGO T-Wristband
Retired
No product available!
Wrist strap for LilyGo TTGO t-wristband module. Black colour
Retired
No product available!
Solar panel with an output voltage of 6 V and a power of 1 W. Provides high efficiency and work stability
Retired
No product available!
8 Mpx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0194
Retired
No product available!
The module with the OV5647 sensor, working with all versions of the Raspberry Pi. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003507
Retired
No product available!
Set of 4 mounting plates for Raspberry Pi 4B compatible with 19-inch 3U rack mount. The holder shown in the 3rd picture is not included in the set and must be purchased separately. ArduCAM U6131
Retired
No product available!
Camera module with IMX477 HQ sensor designed for Raspberry Pi Compute Module (CM3, CM3 +, CM4). Equipped with 1/2.3″ lens with M12 mount and 75° viewing angle. ArduCAM B0271
Retired
No product available!
Camera with a USB interface with a resolution of 8 MP. Equipped with a Sony CMOS IMX179 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM UB0229
Retired
No product available!
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. ArduCAM B0225
Retired
No product available!
2 MPx camera module with OV2311 sensor working with Raspberry Pi. Equipped with a shutter and M12 lens mount. ArduCAM B0219
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 110mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0474