- Out-of-Stock
Li-Po Battery Akyga LP403035 3.7V 400mAh PCM JST 2.54
ID: 1202733
5906574243353
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 400mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0386
Description
Akyga AKY0386 is intended for powering electronic devices operating at a nominal voltage of 3.7V. The LP403035 cell format provides a capacity of 400mAh and a flat, compact construction, enabling installation in enclosures with limited internal space, such as portable electronics, control modules, and embedded projects.
The integrated PCM protection circuit supervises charging and discharging processes, reducing the risk of damage caused by overcharging, deep discharge, short circuit, and overcurrent. The battery is connected via a 150mm lead terminated with a 2-pin JST 2.54 connector, allowing direct connection to development boards, power supply modules, and charging controllers. The AKY0386 model is used in consumer electronics, IoT systems, robotics, and electronic projects requiring small and stable Li-Po power sources.
Warning!
Before installation, read and follow the safety guidelines for lithium-polymer batteries. Improper use may result in damage to the battery!Features
- Battery type: lithium-polymer Li-Po
- Cell format: LP403035
- Nominal voltage: 3.7V
- Nominal capacity: 400mAh
- Configuration: 1S
- Number of cells: 1
- Protection circuit: PCM
- Rechargeable: yes
- Connector: JST 2.54 2-pin
- Cable length: 150mm
- Lead type: wires
- Application: powering electronic devices operating at 3.7V
Kit includes
- 1x Lithium-polymer Li-Po battery with cable and JST 2.54 2-pin connector
1202733
Data sheet
- Battery type
- Li-Po
Other - Output voltage
- 3.7V
- Battery capacity
- 400 mAh
- Battery configuration
- 1S
- Number of cells
- 1
- Output/Connector
- JST 2,54 mm
- Length
- 35 mm
- Width
- 30mm
- Thickness
- 4mm
- Weight
- 9,5 g
Manufacturer AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
Responsible person AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
Other products in the same category (16)
RGB LED matrix display with a resolution of 128x64 (8192 LED). modPan128x64
Retired
No product available!
A stereoscopic microscope with LED backlight, equipped with a trinocular head with an entrance to the camera. It has a wide stand for the test items. KOPPACE KP-7045T-B3
Retired
No product available!
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU
Retired
No product available!
Female terminal block, 8-pin. 3.5 mm pitch. Height 15.6 mm. GOLTEN 15EGTK-3.5-08P-14-00AH
Retired
No product available!
Male terminal block, straight, 8-pin. 3.5 mm pitch. Height 9.2 mm. GOLTEN 15EGTVC-3.5-08P-14-00AH
Retired
No product available!
Test kit with 6 Pogo Pin spring probes designed to work with boards with an ISP connector. It enables the programming of the set without the need to solder the pins. SparkFun KIT-11591
Retired
No product available!
Module with MOSFET RFP30N06LE transistor with N channel. Equipped with two screw connections. For assembly. SparkFun COM-12959
Retired
No product available!
Module with jack connector (TRS) and balanced line transmitter THAT 1646. Offers low distortion and high attenuation. SparkFun BOB-14002
Retired
No product available!
Module with VS1000D chip and SPI Flash memory, which allows you to play sounds in Ogg Vorbix and WAV format stored on a SPI Flash memory. SparkFun DEV-14006
Retired
No product available!
Module with a UV light sensor VEML6070 dedicated to micro:bit. It communicates via the I2C interface. SparkFun SEN-15273
Retired
No product available!
Audio expansion module designed for Odroid C2, C1+ and C4 minicomputers. Equipped with a DAC I2S converter and two RCA connectors and a Toslink connector. Hardkernel HiFi Shield 2
Retired
No product available!
Case dedicated to Orange Pi Zero Plus2 H3 and Orange Pi Zero Plus2 H5 computers. Enables the installation of an expansion module. Orange Pi OP0011
Retired
No product available!
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT
Retired
No product available!
2500 mW laser head designed for installation in a CNC machine. It allows you to engrave in materials such as wood, plastics, paper or thin leather. CNClaser2500mW
Retired
No product available!
5 V DC electromagnet with a holding force of 3 kg and a power of 1 W. It can be used to build a DIY electromagnetic lock, smart cabinet or door. DFRobot DFR0794
Retired
No product available!
A LiDAR camera with a small size and a resolution of 2 MP equipped with an IMU unit. It enables very accurate depth detection. Range up to 9 meters. Intel RealSense LiDAR Camera L515
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 400mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0386