LCD-AG-240128N-FHW K/W-E6

The DC motor driver allows you to control a motor with a voltage in the range of 6 to 28V, the motor can draw up to 60A. Controlled by PWM modeling, it can be used in robotics, small electric vehicles. Digilent 410-334-2

SERIAL MAGNETER MONITOR - A SELF-ASSEMBLY KIT

Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Included with accessories. Pimoroni PIM671

Board with STM32F103CBT6 microcontroller and sensors: L3G4200D (gyroscope), ADXL345 (accelerometer), HMC5883L (magnetometer) and BMP085 (pressure sensor). Base for building IMU for eg multicopter

MODERN LIGHTING CABIN - PRINTED PLATE

Starter kit with NanoPi NEO minicomputer. The set includes a NanoPi NEO 512MB minicomputer, an aluminum housing, a NanoHat OLED display, a MicroUSB cable, a heat sink, an 16GB memory card and the necessary mounting hardware. FriendlyELEC NEO Metal Complete Kit

TELEPHONE REGISTER WITH CLIP DECODER - SELF-ASSEMBLY KIT

Development board based on GD32VF103CBT6 MCU with 32-bit RISC-V core. It is equipped with an IPS RGB LCD display with a diagonal of 0.96 inch 160x80 and a housing. Seeed Studio 102991302

Assembled falling meteorite. AVT3186 C

CONTROLLER OF EYE CAMERAS - CONTINUOUS PLATE AND PROGRAMMED SYSTEM

Pololu 42x19mm Idler Wheel/Sprocket Pair - White

DIGITAL ECHO - PRINTED PLATE

Tomasz Frenchman

Generic Linear Actuator: 8" Stroke, 12V, 0.6"/s

The Pololu MinIMU-9 v3 is an inertial measurement unit (IMU) that packs an L3GD20H 3-axis gyro and an LSM303D 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. Pololu 2468