- Out-of-Stock
MYC-SAM9G15-V2 CPU module
ID: 209324
MYC-SAM9G15-V2 CPU module, MYIR
MYC-SAM9G15-V2 CPU module is a single board computer base ATMEL AT91SAM9G15 ARM9 processor working at 400MHZ. It integrates all core components and memories and plugged on base board MYD-SAM9G15-V2 development board. It carries 128MB DDR2 SDRAM, 256MB NandFlash and 4MB DataFlash to build and minimal CPU sub-system for evaluation and development.
The CPU module has also been called as a core board, a CPU core module or a CPU board.
The CPU module extended periphery signals and get power supply by two 70-pin connectors, it's easy for the user to make a base board.
MYC-SAM9G15-V2 shares the same PCB circuitry with MYC-SAM9X5-V2 CPU module series.
MYC-SAM9X5-V2 CPU Modules series have five types (click to see):
MYC-SAM9G15-V2 CPU module features
- ATMEL SAM9G15 ARM9 processor
- 256MB NandFlash, 4MB DataFlash, 128MB DDR2 SDRAM, 64KB EEPROM
- 10 / 100Mb / s Ethernet MAC controller (DM9161)
- Power led (Red), tick led system (blue)
Board features
- CPU Module: 72mm x 50mm, thickness 1.6mm
- CPU Module: 6 layers; independent ground layer
- PCB Flash gold process
- Working temperature: -40 ° ~ + 85 °
- Industrial level PCB board and components
- Rohs compliance, Lead-free
Noted: ATMEL SAM9X5 CPU series are mainly focus on industrial level. If the products you are developing is 0 ° ~ + 70 °, please contact us for the new quotation.
Software resource
- MDK-ARM example code
- Linux 2.6.39
- Andriod 2.3.5
Download this file to MYD-SAM9X5_V2 development board Packing list for MYC-SAM9G15-V2 CPU module
| MYC-SAM9G15-V2 × 1 | DVD × 1 |
To download
- ATMEL SAM9G15 Datasheet
- ATMEL SAM9G25 Datasheet
- ATMEL SAM9G35 Datasheet
- ATMEL SAM9X25 Datasheet
- ATMEL SAM9X35 Datasheet
- Build Linux Environment Based on Virtualbox
- MYD-SAM9X5 UserManual V1.6
- MYC-SAM9G15-V2 CPU module - one MYC-SAM9G15-V2 CPU module
- DVD - one product DVD disk
209324
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Retired
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1
Retired
No product available!
50 W soldering iron for Bakon BK950D station. Works with soldering tips from the T13 series
Retired
No product available!
HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface
Retired
No product available!
HAT type power supply module with cooling fan designed for Raspberry Pi 4 model B. Provides flexible power supply to the minicomputer via DC 5.5x2.5 mm connector, XH2.54 mm connector, microUSB or USB type C connector
Retired
No product available!
Wall charger with USB and USB type C sockets. Supports QC3.0 + PD3.0 fast charging protocol with a maximum current of up to 3 A. USAMS US-CC085
Retired
No product available!
A spatula for removing prints from the 3D printer table. Made of stainless steel, it is durable and handy
Retired
No product available!
A needle with a diameter of 0.4 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
Retired
No product available!
Aluminum tensometer beam, allowing weight measurement up to 2 kilograms. It has four wires. It is used in kitchen scales and portable scales
Retired
No product available!
Educational set for building robots based on Totem construction elements. Designed for beginners, it allows you to create 7 robot structures based on the included assembly instructions. Totem TKR-RK1
Retired
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM331
Retired
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM332
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin output for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM320
Retired
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM321
Retired
No product available!
MYC-SAM9G15-V2 CPU module, MYIR