AVT1560 / 2 B

Tact switch 3x4mm, h = 2.5mm, 4-pin, straight, white

Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161

Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758

Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756

Tact Switch 6.2x6.2mm, h = 5.5mm, 4-pin, straight, black, SMD

External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531

128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A

Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW

External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01

External enclosure designed to protect, transfer and store data on M.2 SSD drives with NVMe or SATA interface. Unitek S1204B

Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module

LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074

A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011

The 74LVC1G07GV is a compact, energy-efficient single-channel logic buffer with an open-drain output, designed for digital systems operating within a voltage range of 1.65 V to 5.5 V. It offers fast switching, high drive capability, and stable performance in applications such as LED control, data lines, and interfaces with mixed logic level standards.

100-pin connector (socket) for Raspberry Pi CM4 modules. 0.4 mm pitch, 1.45 mm height

Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1