- Out-of-Stock
New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
DSO Nano v3 - portable mini digital oscilloscope
ID: 577518
Pocket-sized digital oscilloscope with memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display, USB port and charging function. Seeed Studio 109990013
Description
The DSO Nano V3 is a pocket-sized handheld digital oscilloscope. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display, USB port and charging function. It has preloaded firmware and a built-in 2 MB storage chip, on which you can save recorded waveforms. It allows you to measure basic parameters, including voltage, current, frequency, period, rise and fall times, amplitude and resistance. It is compact, easy to use and meets the basic requirements of a laboratory, electrical repair and electrical engineering. Full documentation and examples of use are available on the product page.
Features
- 2.8'' TFT color LCD display
- Display resolution: 320x240
- 65K colors
- Frequency band: 0 to 200 kHz
- Sampling rate: 1Msps 12 bits
- Sampling memory depth: 4096 points
- Horizontal sensitivity: 1uS / Div ~ 10S / Div (1-2-5 step)
- Vertical sensitivity: 10mv / div ~ 10V / div (probe x1), 0.5V / div ~ 10V / div (probe x10)
- Input resistance> 500KΩ
- Input voltage: up to 40Vpp (probe x1)
- Coupling mode: DC
- Trigger mode: Auto， Normal， Single， None
- Automatic measurement: frequency, cycle, load, Vpp, Vram, Vavg, DC voltage
- Built-in test signal: 10Hz to 1MHz (steps 1-2-5)
- Built-in memory: 2 MB
- Computer connection interface: USB
- Battery
- Dimensions 105 x 53 x 8 mm
Kit contains
- DSO Nano v3
- Metal stand
- A set of screws
- Test leads
- Case
577518
Data sheet
- Type of oscilloscope
- Portable
- Memory depth
- 4 Kpts
- Number of channels
- 1
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Oscilloscope for pc 2x50mhz / 1ghz + power supply
Delivery date unknown
No product available!
Oscilloscope with universal meter function. It allows you to measure direct and alternating voltage, direct and alternating current, resistance, capacity and frequency. Equipped with diode tester, circuit continuity test, automatic switch and display backlight and USB interface. Uni-T UT81C
zł1,233.94
Delivery date unknown
No product available!
Single-channel 25 MHz oscilloscope with multimeter function. It allows you to measure direct and alternating voltage, direct and alternating current, resistance, capacity. Equipped with a USB interface. Uni-T UT1025CL
zł1,313.64
Delivery date unknown
No product available!
Other products in the same category (16)
Flexible adapter for microSD to SD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC
Retired
No product available!
Black and white e-Paper display with a diagonal of 7.5" and a resolution of 800x480 px. SPI interface. Without PCB. Waveshare 7.5inch e-Paper (G)
Retired
No product available!
A mini welding machine designed to connect 18650 type battery cells
Retired
No product available!
Brushless motor driver module with current efficiency up to 20 A. It can work with LiPo 3S and 4S packages. BLHeli XSD20A
Retired
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
Retired
No product available!
Prototyping kit dedicated to Raspberry Pi Pico. It offers the pins of all RPi Pico pins, a contact plate, buttons, LEDs and a buzzer. SB Components 20843
Retired
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
Retired
No product available!
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
Retired
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
Retired
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22663
Retired
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22670
Retired
No product available!
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a D24 tip
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a B2 tip
Retired
No product available!
Module with 4 LED displays (three LEDs in red, yellow and green) dedicated to the Raspberry Pi. Perfect for use as a traffic light. SB Components 06977
Retired
No product available!
6-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21802
Retired
No product available!
Pocket-sized digital oscilloscope with memory. Based on a microcontroller with an ARM Cortex-M3 core, it is equipped with a 320x240 pixel color display, USB port and charging function. Seeed Studio 109990013