- Out-of-Stock
Arducam 13MP Pan Tilt Zoom PTZ Camera - PTZ AR1335 13MP Camera for Raspberry Pi
ID: 582477
The camera set with the AR1335 sensor allows you to control zoom. Works with Raspberry Pi minicomputers. The camera is equipped with a matrix with a resolution of 13 MPx. ArduCAM B016713MP
Description
The camera set with the AR1335 sensor allows you to control zoom. It works with minicomputers from the Raspberry Pi series, including: Raspberry Pi 4 model B, Raspberry Pi 3 model B+ , Raspberry Pi 3 model B. The sensor used has a matrix with a resolution of 13 MP and allows you to record video in the 7fps @ 4160×3120 format . It has a built-in IR filter. The module is attached to the Raspberry Pi via a dedicated socket. It uses a CSI interface specifically developed for use with cameras. The camera is supported by the latest version of the Raspbian operating system. The camera module comes with a movable PTZ lens and a control board. Full documentation is available on the product page.
Features
- Works with Raspberry Pi 4 model B, Raspberry Pi 3 model B+ , Raspberry Pi 3 model B
- Matrix: AR1335
- Matrix resolution: 13 MP
- 1/3 ″ format
- Number of pixels: 4160 × 3120
- Pixel size: 1.1 x 1.1 um
- Viewing angle: 91 ° - 25 ° (horizontal)
- Movable PTZ lens
- Built-in IR filter
- Photo resolution: 4160 × 3120 pixels
- Video:
- 7fps @ 4160×3120
- 11fps @ 3264×2448/3840×2160
- 24fps @ 2560×1440
- 30fps @ 1600×1200/1920×1080/640×480/320×240
Kit contains
- Camera module AR1335 13 MPx
- PTZ lens
- Control board
- FFC / FPC 15-pin 30 cm tape
- XH2.54 cable with 30 cm 6-pin female connector
- 4 x distance
582477
Data sheet
- Resolution
- 13 Mpx
- Interface
- MIPI CSI-2
- Sensor
- AR1335
- IR filter
- Yes
- Lens assembly
- M12
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 157
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 144
Available
Camera set with AR1335 sensor with 13 MPx matrix, allows for remote camera rotation, tilt angle and zoom control. Works with Raspberry Pi minicomputers. Swivel base included. ArduCAM B0167B13
zł1,308.84
Delivery date unknown
No product available!
Other products in the same category (16)
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-01
Retired
No product available!
Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-05
Retired
No product available!
USB TO UART solution with USB Type A connector, Waveshare
Retired
No product available!
No product available!
The second version of the clock synchronization signal receiver, transmitted with AM modulation (DCF77). The built-in MAS6180 system allows you to receive timing frames from a time pattern using a carrier frequency of 77.5 kHz. Thanks to this module, it is possible to create a clock with automatic date and time synchronization. The module has a ferrite antenna. modDCF77 v2
Retired
No product available!
Pyboard is a compact development board that allows you to use the MicroPhyton software. Min. 3-axis accelerometer (MMA7670), diodes, monostable buttons and microSD memory card slot. Adafruit 3497
Retired
No product available!
LCD touch screen with 160x128 pixel resolution, LCD160CR (I2C or UART and SPI) display controller. Adafruit 3498
Retired
No product available!
Desktop computer kit with expansion board that can turn a Raspberry Pi into a real desktop PC.
Retired
No product available!
BB Black Expansion CAPE, Features RS485 and CAN Interfaces
Retired
No product available!
NVIDIA development kit with the Tegra X2 SoC chip containing two Denver cores, four 64-bit ARM Cortex A57 cores and a Pascal graphic layout consisting of 256 cores supporting CUDA technology. Jetson TX2 Development Kit
Retired
No product available!
A set of PCBs with a programmed layout for the LED thermometer - version 27mm green. AVT1697 / 2 / G A +
Retired
No product available!
AVT kit for self-assembly of the LED thermometer - 27mm green version. AVT1697 / 2 / GB
Retired
No product available!
Assembled LED thermometer - 27mm green version. AVT1697 / 2 / GC
Retired
No product available!
No product available!
No product available!
The camera set with the AR1335 sensor allows you to control zoom. Works with Raspberry Pi minicomputers. The camera is equipped with a matrix with a resolution of 13 MPx. ArduCAM B016713MP