- Out-of-Stock
Module with an e-Paper display with a diagonal of 6" and a resolution of 800x600 px. It has the ability to display content with a 16-step gray scale in the colors: black and white. Supports the partial refresh function, and the built-in controller communicates via USB, SPI or I80 interface Displays of this type are characterized by high contrast of the displayed image and consume power only when the displayed content is changed The module is compatible with 5V systems. The kit includes an overlay that allows you to connect the display to the Raspberry Pi via a 40-pin connector. Support is available on the Wiki page in the form of examples of use with Raspberry Pi and STM32.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Module with e-Paper display, 6" diagonal and 1448x1072 px resolution. Communication via USB, SPI or I80 interface. Waveshare 6inch HD e-Paper HAT
No product available!
6" black and white e-Paper display with 1448x1072 px resolution. Parallel interface. No PCB. Waveshare 6inch HD e-Paper
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Black
No product available!
No product available!
4-pin ARK mounting strip, 2.54 mm pitch. 308-2.54-04P-14-00AH
No product available!
No product available!
The stabilizer module is used to stabilize the output voltage at an appropriate level and filter interference. The module can be supplied with voltage up to + 16V, and the output voltage is + 3.3V. MOD-06 / 3V3.Z
No product available!
No product available!
No product available!
No product available!
No product available!
Pre-installed Ubuntu 14.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung.
JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode
No product available!
No product available!
No product available!
Two large (120mm-diameter) wheels with black tires are made of soft, spiked rubber for increased traction, and the plastic hubs are metallic red in color. Sold in pairs. Pololu 1555
No product available!
ROSA3D filament made of high quality PVB. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PVB Smooth Green Transparent
No product available!
AVT kit for self-assembly of a digital thermostat. AVT5441 B
No product available!
Module with e-Paper display, 6" diagonal and 800x600 px resolution. Communication via USB, SPI or I80 interface. Waveshare 6inch e-Paper HAT