- Out-of-Stock
New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
10.3" E-Ink e-Paper Monitor HDMI - Waveshare 17660
ID: 582535
10.3" e-Paper monitor with an HDMI interface. It is characterized by high resolution 1872x1404 pixels, wide viewing angle and low energy consumption. Waveshare EINK-DISP-103-EU
Description
10.3" e-Paper monitor with HDMI screen. It has a high resolution of 1872x1404 pixels, wide viewing angle and low energy consumption. E-Paper displays are characterized by high contrast of the displayed image and use power only when the displayed content changes. up to 10 options for contrast and 5 options for refresh rate Combined with different modes, it is possible to fine-tune the best effect for yourself.
The monitor has a lower refresh rate than LCD (approximately 15Hz in A2 mode), so it is designed for office use such as document editing, spreadsheet creation and web browsing. It supports work in one of three modes: GC16, A2 and A2+.
The monitor can serve as a full-screen display in desktop mode for Huawei (EMUI) and Samsung (DEX) smartphones. Works with minicomputer Raspberry Pi, Jetson Nano and PC. The display has support for a wide range of operating systems: from Raspbian, Ubuntu, Kali for Raspberry Pi to Windows 10, 8.1, 8 and 7 for PC. Full documentation is available on the product Wiki page.
Features
- Diagonal: 10.3"
- Resolution: 1872x1404 px
- Display type: e-Paper
- Video connector: HDMI
- 170 ° wide viewing angle
- It does not emit blue light harmful to the eyes
- Passively reflective, requires ambient lighting
- Ability to tune the contrast and adjust the refresh rate
- Choice of operating mode: GC16, A2 and A2+
- Power supply: 5V
- Works with Raspberry Pi (all versions), Jetson Nano, PC, phones
- Dimensions: 238 x 187 mm
Kit contains
- 10.3" e-Paper Monitor
- HDMI to micro HDMI adapter
- HDMI cable
582535
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 10,3
- Resolution
- 1872 x 1404 px
- Interface
- HDMI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł499.00
24h
Available quantity: 30
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 72
Available
Portable 7" monitor with touch screen. The monitor is equipped with HDMI interface for image display and USB for touch screen. High resolution 1920x1080 pixels. Waveshare 7inch FHD LCD
Delivery date unknown
No product available!
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,189.00
24h
Available quantity: 8
Available
Other products in the same category (16)
Antenna with built-in LNA amplifier with high sensitivity, for mounting in a device using a GPS module. The antenna has a 25mm cable, terminated with a U.FL plug (IPEX). Dimensions of the device: 9 x 9 x 4mm
Retired
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
Kit: MAXimator, MAXimator Expander, ZL32PRG - USB Blaster PRO
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Retired
No product available!
MYD-JA5D44 Development Board is a complete educational platform. Its heart is the MYIR MYC-JA5D44 module, which was equipped with the Atmel SAMA5D44 processor based on Cortex-A5 cores. The processor can work at a maximum frequency of 600 MHz. Min. RS232, RS485 connectors, HDMI connector, 3.5 mm Jack Audio inputs, microSD memory card slot, 10/100 Mbps Ethernet slot and many more.
Retired
No product available!
The Raspberry Pi GPIO Triple Expansion Board converts the single GPIO headers on your Raspberry Pi into three parts. DFR0385
Retired
No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12". Adafruit 1648
Retired
No product available!
Comes with a 6"x6" (152mm x 152mm) square of Pyralux. It\'s ED-Y type copper at 35um (1 oz/ft2) and has a polymide of 25um (1 mil). The thick copper layer means it can carry a lot of current, and its trivial to solder to it. Adafruit 1894
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - gray, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - blue, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 1.5 m - black, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 3 m - black, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - blue, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - gray, with 2xRJ45 connectors
Retired
No product available!
The board gives the possibility to significantly extend the functionality of the STM32F407G-DISC1 development kit. The plate contains, among others memory card slot (microSD), Ethernet socket and connectors that can be used to attach SMT32F4DIS modules to the board
Delivery date unknown
No product available!
Camera board for the STM32F407G-DISC1 set. It allows you to capture an image with a resolution of 1280 x 1024 pixels (1.3MP). The set includes a flexible cable that allows the camera to be connected to the STM32F4DIS-BB expansion board
Retired
No product available!
10.3" e-Paper monitor with an HDMI interface. It is characterized by high resolution 1872x1404 pixels, wide viewing angle and low energy consumption. Waveshare EINK-DISP-103-EU