- Out-of-Stock
BleBox SwitchBox v1 - a wireless WiFi home device controller
ID: 563875
BleBox SwitchBox is a module that allows you to control 230 V home appliances up to 3 kw via a WiFi network using a smartphone application from anywhere in the world. Small dimensions allow you to close the module in an electric box.
Description
BleBox SwitchBox is a module that allows you to control 230 V home appliances up to 3 kw via a WiFi network using a smartphone application from anywhere in the world. In order to use BleBox, all you have to do is set up the device via a web browser. Small dimensions allow you to close the module in an electric box.
The device has screw connectors for mounting wires, small dimensions allow to close the module in the electric box.
To connect the module to your home WiFi network, you must connect the computer to the WiFi network created by the BleBox module. Then just start the web browser and enter the IP address of the device: http://192.168.4.1. On the configuration page, select the home WiFi network and enter the access password.
When using the Android Play or AppStore store, the wBox - control everything needs to be downloaded. If the WiFi network has been properly configured, the module will be automatically detected by the application.
Lead
- OUT - voltage output of the relay
- L - 230 V positive pole
- N - power supply, neutral wire - ground
- IN - possibility of connecting an external switch, the second line of the switch should be connected to the positive 230 V line marked with the symbol N
properties
- Power supply: 230 V AC (mains)
- Power consumption: less than 1 W
- Number of outputs: 1
- Type of control outputs: relay
- Load current consumption: up to 16 A
- Load power: up to 3500 W
- Number of entries: 1
- Input type: logic, shorted to the N line of the mains voltage
- Communication standard: μWiFi, compatible with 2.4 GHz WiFi
- Bi-directional transmission type: encrypted
- Operating mode
- direct connection (as an Access Point),
- WiFi connection via a standard router,
- connection with access from anywhere in the world via the Internet
- Compatible devices: iPhone, iPad, iPad Mini, Android, computers and mobile devices with HTML5 support
- Housing made of halogen-free polyurethane composition - self-extinguishing for thermal class B (130 ° C)
- Dimensions: 39 x 47 x 23 mm
563875
You might also like
BleBox LightBox v3 is a multi-zone LED RGB lighting controller, extremely easy to install, used to change colors in your home using Bluetooth.
Regular pricezł133.68zł99.90
24h
Available quantity: 1
Available
IR proximity sensor used to detect objects at a distance of 10mm to 80mm using infrared radiation. It is powered by 5 V and has a digital output. DFRobot SEN0556
zł17.81
24h
Available quantity: 8
Available
Other products in the same category (16)
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba
Retired
No product available!
Pre-installed Android4.4 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba. JEDEC/MMCA version 5.0:HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
Cooling Fan X is a cooling fan that can be used to cool any processor that works under heavy load. It can be mounted on the heat sink housing with 4 screws
Retired
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
Retired
No product available!
The cable allows connecting the ATMEL-ICE programmer to the commissioning set with any connector (operated by the programmer), through individual pin connectors
Retired
No product available!
1-channel monochrome system of adding subtitles on the image (OSD - On-Screen Display) with integrated EEPROM, TSSOP28, Maxim memory
Retired
No product available!
No product available!
The controller can control two brush motors, communicating with the master system using USB Micro-B, TTL serial interface, analog signals, as well as signals from the RC apparatus. The current capacity of 5A / channel allows you to control high-power motors. Polol 2394
Retired
No product available!
BleBox SwitchBox is a module that allows you to control 230 V home appliances up to 3 kw via a WiFi network using a smartphone application from anywhere in the world. Small dimensions allow you to close the module in an electric box.