- Out-of-Stock
AVT390 A +
ID: 190694
8-CHANNEL RC5 / SIRC SWITCH - PLATEBOARD AND CONTROLLED SYSTEM
8-CHANNEL RC5 / SIRC SWITCH - PLATEBOARD AND CONTROLLED LAYOUT
Producer: AVT
AVT390 - 8 channel switch controlled by any infrared remote control The device allows you to broaden the range of applications of standard remote controls from RTV equipment. It allows to connect up to 8 devices, any button can be assigned to any output, practically any remote control, thanks to which you can use buttons normally not used. In addition, the device can "learn" several different pilots regardless of the standard in which they work. It is possible to control bistable - pressing the button activates the output, the next pressing of the button disconnects the output, or monostable control - the output is switched on as long as the button is pressed, release of the button disconnects the output. To the outputs you can connect directly relays or LED bulbs to 12V. The device is ideally suited as a device switch, signal switch or lighting controller.
Selected parameters:
- works with almost any infrared remote control,
- the ability to assign any button to any of the outputs, any remote control,
- controlling the outputs in a bistable manner (on / off) or monostable (impulse),
- control method set individually for each output,
- OC type outputs - active state: minus supply,
- load capacity of each output: 200mA,
- power supply: 7 ... 20 VDC, current consumption of the device itself 20mA,
- dimensions of the device: 73 × 35 × 20 mm.
- a printed circuit board, programmed layout and documentation in the set
A version with a set of components for self-assembly is available
- Detailed description in
Download
190694
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Heat shrink tubing with tin and glue. Used for quick connection of wires
Retired
No product available!
Heat shrink tubing with tin and glue. Used for quick connection of wires
Retired
No product available!
Module with a digital gas sensor MiCS-4514. It allows you to measure the concentration of CO, C2H5OH, H2, NO2, NH3 and communicates via the I2C interface. DFRobot SEN0377
Retired
No product available!
Universal power supply module working on the basis of four 18650 batteries. It offers DC outputs with voltages of 9 V, 12 V, 24 V and adjustable in the range from 1 to 20 V, as well as two USB 5 V outputs. DFRobot FIT0674
Retired
No product available!
Flexible adapter for microSD to SD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC
Retired
No product available!
Black and white e-Paper display with a diagonal of 7.5" and a resolution of 800x480 px. SPI interface. Without PCB. Waveshare 7.5inch e-Paper (G)
Retired
No product available!
A mini welding machine designed to connect 18650 type battery cells
Retired
No product available!
Brushless motor driver module with current efficiency up to 20 A. It can work with LiPo 3S and 4S packages. BLHeli XSD20A
Retired
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
Retired
No product available!
Prototyping kit dedicated to Raspberry Pi Pico. It offers the pins of all RPi Pico pins, a contact plate, buttons, LEDs and a buzzer. SB Components 20843
Retired
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
Retired
No product available!
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
Retired
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
Retired
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22663
Retired
No product available!
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22670
Retired
No product available!
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
Retired
No product available!
8-CHANNEL RC5 / SIRC SWITCH - PLATEBOARD AND CONTROLLED SYSTEM