- Out-of-Stock
AVT5148 A +
ID: 193025
STEREOPHONE CODEC WITH S / PDIF INTERFACE - PLATES AND PROGRAMMED LAYOUT
STEREOPHONE CODEC WITH S / PDIF INTERFACE - PLATES AND PROGRAMMED LAYOUT
Producer: AVT
Presented codec with S / PDIF interface is characterized by the possibility of quite flexible configuration and, consequently, many own tests and can be a contribution to a deeper interest in digital processing of audio signals. The device is designed based on the Philips UDA1355 chip. It can work in many configurations set in static mode (without a UC) as well as with a microprocessor controller. It has four selectable internal S / PDIF input selector, S / PDIF output, built-in A / CD and D / A converters. The structure also includes a DSP processor that allows you to adjust the level of the A / D converter's signal output as well as the level and color of the D / A converter signal. A very important advantage is the ability to create two independent signal paths, each with a different clock frequency.
The device is especially recommended for advanced electronics-audiophiles
Selected parameters:
- stereo analog input
- amplification of the input amplifier regulated in the range of 0-24
- range of digital output level adjustment from A / D converter 63,5dB - 24dB with a step of 0.5dB
- types of switchable inputs: I2S with programmable data format, stereo analog input
- built-in interpolator filter - DSP processor
- range of bass adjustment 0 to +18 (+24) dB, high tones 0 to + 6dB
- independent adjustment of the level of the output signal in each channel
- digital mixer of two signals
- extensive programmable system clock generation
- power supply - 230 Vac
- in the set, printed circuit boards, programmed layout and documentation
- Detailed description in
Download
193025
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
ARK terminal connector spring 11-pin, pitch 2.5 mm, non-detachable.
Retired
No product available!
ARK terminal connector spring 12-pin, pitch 2.5 mm, non-detachable.
Retired
No product available!
ARK terminal connector spring 4-pin, pitch 5.00 mm, non-detachable
Retired
No product available!
Minicomputer with built-in NVIDIA Jetson Nano module with 4 GB RAM. In an aluminum housing, it has the JetPack installed. Seeed Studio 110061361
Retired
No product available!
ADS-B antenna made of fiberglass working at 1090 MHz with 8.5dB amplification). 1.2 m long. Pimoroni COM-B3301
Retired
No product available!
Switch with relay for installation in a socket. It offers the ability to control one device with an operating current of up to 16 A and voltage from 110 to 240V AC or from 24 to 30V DC. Shelly Plus 1PM
Retired
No product available!
A set dedicated to control BLDC motors. It consists of the X-NUCLEO-IHM07M1 module with the L6230 controller, the NUCLEO-F302R8 development board, and the BLDC motor and power supply. STMicroelectronics P-NUCLEO-IHM002
Retired
No product available!
A miniature linear actuator that has a stroke range of up to 30 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
Retired
No product available!
A miniature linear actuator that has a stroke range of up to 80 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
Retired
No product available!
A miniature linear actuator that has a stroke range of up to 100 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
Retired
No product available!
A mini welding machine designed to connect 18650 type battery cells
Retired
No product available!
Module with USB 3.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI and DVP interface. ArduCAM B0317
Retired
No product available!
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
Retired
No product available!
360° laser scanner. It performs measurements with a frequency of 6 revolutions per second and has a range of up to 8 m. Waveshare Triangulation LiDAR LD14
Retired
No product available!
ROSA3D filament made of high-quality polycarbonate with polybutylene terephthalate. 0.5 kg of 1.75 mm filament is wound on the spool. ROSA3D PC-PBT Black
Retired
No product available!
ROSA3D filament made of high-quality polycarbonate with polybutylene terephthalate. 1 kg of 1.75 mm filament is wound on the spool. ROSA3D PC-PBT Black
Retired
No product available!
STEREOPHONE CODEC WITH S / PDIF INTERFACE - PLATES AND PROGRAMMED LAYOUT