- Out-of-Stock
AVT5160 UK
ID: 193528
CLIMATIC CAR AIR CONDITIONER CONTROLLER - PROGRAMMED SYSTEM
CLIMATIC CAR AIR CONDITIONER CONTROLLER - PROGRAMMED SYSTEM
Producer: AVT
Car air conditioning is a device that increases driving comfort, especially on hot days. In many cars, the controller used in it allows you to work only with manual parameter settings. We can get full comfort only when the air conditioning will work completely automatically.
The presented system is a controller that supervises and controls the operation of the supply air fan and the compressor of the manual air conditioning system. The driver's task is only to set the desired temperature and to ensure that the temperature knob of the ventilation system is correctly set (warm / cold) - depending on Climatic's indications.
The device is especially recommended for car owners with manual air conditioning
Selected parameters:
- three measuring points
- measuring range 0 - 99 ° C
- accuracy of temperature measurement 0.5 ° C
- control hysteresis -1 / + 1.5 ° C (cooling), -1.5 / 0 ° C (heating)
- adjustment stroke 1 ° C
- temperature adjustment range 15 - 25 ° C
- executive elements - relays
- built-in LCD display
- power supply - 12 - 15Vdc
- programmed layout
- Detailed description in
Download
193528
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Needle bending needle, for precise glue application, Flux 0.603mm internal diameter and 0,9081mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.514mm internal diameter and 0,8192mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.413mm internal diameter and 0,7176mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.337mm internal diameter and 0,6414mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,311mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.25mm internal diameter and 0,5144mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,26mm internal diameter and 0,4636mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0,21mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Needle bending needle, for precise glue application, Flux 0.81mm internal diameter and 1.26mm outside diameter
Retired
No product available!
Silicone protective case for the Huskylens vision module. It was made of a soft and flexible material, it perfectly fits the shape of the tile. DFRobot FIT0647
Retired
No product available!
Module with a CCS811 air quality sensor for measuring the concentration of carbon dioxide (CO2) and volatile organic compounds (VOC) in the air. It communicates via the I2C interface. DFRobot SEN0339
Retired
No product available!
Evaluation kit with SiFive Freedom E310 microcontroller with RISC-V (ISA) architecture. It includes 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 microcontroller for USB support and JTAG interface, Qwiic and USB Type-C connector. SparkFun DEV-15594
Retired
No product available!
Cable with a length of 150 mm, on one side terminated with a Qwiic connector, and on the other side with single female goldpin connectors. It allows you to connect Qwiic modules, e.g. with development board. SparkFun CAB-14988
Retired
No product available!
Extension module for Raspberry Pi designed to build the user interface. It is equipped with a 2.4-inch TFT LCD display, microphones, speaker, buttons, joystick and RGB LEDs. SparkFun DEV-16653
Retired
No product available!
Adapter board from SODIMM200-2.5 to 2.54mm connectors
Retired
No product available!
The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601
Retired
No product available!
CLIMATIC CAR AIR CONDITIONER CONTROLLER - PROGRAMMED SYSTEM