- Out-of-Stock
Set with 2 DOF control platform for cameras designed for Raspberry Pi minicomputers. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0227
Set with 2 DOF control platform designed for Raspberry Pi minicomputers. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions, making movements 180 degrees horizontally and 145 degrees vertically. A servo board with 12-bit PWM PCA9685 controller and a light sensor was used to control the servos.
Attention!
Minicomputer Raspberry Pi and the camera visible in the picture is not included in the set. It must be purchased separately.
The product is also available in a set with a 5 MP OV5647 camera.
Digital Servo GH-S37D
Control Board
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
Set with 5 MP camera and 2 DOF control platform designed for Raspberry Pi minicomputers. The camera is equipped with an OV5647 sensor, equipped with an integrated IR filter. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0033PT
No product available!
Development platform powered by Exynos5 Octa Cortex™-A15 1.4Ghz quad core and Cortex™-A7 quad core CPUs
No product available!
No product available!
Neodymium rectangular magnet with dimensions of 10x10mm a and a height of 3 mm.
No product available!
Raspberry Pi 2 and Pi 1 model B+ Enclosure - Black
AVT set for self-assembly of the clock with a 55mm display set by means of GPS. AVT552 / 2 B
No product available!
Easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity, and temperature. There are also connections to optional sensors such as wind speed/direction, rain gauge, and GPS for location and super accurate timing. DEV-12081
No product available!
ADC and DAC converter module based on the PCF8591 system with I2C and the possibility of cascading other I2C modules. Waveshare PCF8591 AD DA Board
No product available!
The robust hardware design platform which uses the Altera Cyclone V FPGA device as the center control for its peripherals such as the on-board USB Blaster, video capabilities etc. Contains all components needed to use the board in conjunction with a computer that runs the Microsoft Windows XP or later
No product available!
DSLR SHUTTER ELECTRONIC DRAIN HOSE FOR CAMERA - SHEET PRINTED AND PROGRAMMED UK? ADVERTISING
No product available!
MYIR MYC-C7Z010 is a single board module based on the MYC-C7Z010 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
No product available!
No product available!
Diamond Brush thermal grease with the addition of diamond dust (10%). Great for use in computers (processors, graphics cards).
No product available!
No product available!
No product available!
No product available!
Andrzej Chochowski
No product available!
Set with 2 DOF control platform for cameras designed for Raspberry Pi minicomputers. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0227