- Out-of-Stock
ArduCAM Pan Tilt Camera - Set with 5MP OV5647 camera and 2 DOF platform for Raspberry Pi
ID: 579807
Set with 5 MP camera and 2 DOF control platform designed for Raspberry Pi minicomputers. The camera is equipped with an OV5647 sensor, equipped with an integrated IR filter. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0033PT
Description
Set with 5 MP camera and 2 DOF control platform designed for Raspberry Pi minicomputers. The camera is equipped with an OV5647 sensor, equipped with an integrated IR filter. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions, making movements 180 degrees horizontally and 145 degrees vertically. A servo board with 12-bit PWM PCA9685 controller and a light sensor was used to control the servos.
Attention!
Minicomputer Raspberry Pi visible in the picture is not included in the set. It must be purchased separately.
Features
Camera
- Sensor: OV5647
- Resolution: 5MP 2592H x 1944V
- Frame Rate: 30fps@1080P, 60fps@720P
- IR Sensitivity: Integral IR filter, visible light only
- Field of View: 54°(H) x 41°(V)
- Camera Board Dimension: 25 x 24mm
Digital Servo GH-S37D
- Torque: 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
- Operating Speed: 0.13sec/60° at 3.6V, 0.09sec/60° at 4.8V
- Operating Voltage: 3.6v~4.8v
- Operating Current: <350mA
- Dead Band: 3 usec
- Dimension: 20 x 8.75 x 22mm
Control Board
- PWM Driver: PCA9685
- PWM resolution: 12-bit
- Ambient light sensor: TSL2581FN
- Ambient light resolution: 16-bit
- Communication interface: I2C
- Operating voltage: 3.3V/5V
- Dimension: 25 x 61mm
Kit contains
- 5MP camera for Raspberry Pi with 15 cm 15-pin cable for Raspberry Pi
- 15 pin to 22 pins cable for Raspberry Pi Zero and W
- 2 x Digital servo
- A set of bracket elements and screws
- PWM control board
- 4 x F-F connection cable
- 2 x M-F connection cable
579807
Data sheet
- Resolution
- 5MPx
- Interface
- MIPI CSI-2
- Sensor
- OV5647
- IR filter
- Yes
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.77
24h
Available quantity: 294
Available
A set of 40 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-40-17)
zł5.69
24h
Available quantity: 595
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 107
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 105
Available
Other products in the same category (16)
No product available!
No product available!
Instumentation Amplifier, Low-Noise, Low-Distortion, DIP8, Burr-Brown Products, RoHS
Retired
No product available!
No product available!
David McDowell, Jitesh Panchal, Hae-Jin Choi, Carolyn Seepersad, Janet Allen, Farrokh Mistree
Delivery date unknown
No product available!
The HiFi Shield Plus provides both stereo RCA connectors and a 3.5mm stereo jack (all gold-plated) to connect to external amplifiers and other audio equipment. Via TI\'s high-end PCM5102 DAC chip (Burr-Brown) it supports 16, 24, 32 bit audio formats with minimal distortion -93dB and ideal dynamics 110dB+ plus amazing sampling rates of 384kHz
Retired
No product available!
Thermopad, two-side thermo-adhesive tape, 20mm x 130mm x 1mm, 6W / mK, AG Thermopiles, RoHS
Retired
No product available!
No product available!
Development board FPGA PYNQ-Z1 and accessor set. Includes base plate, power supply, cables and SD card with system image for PYNQ-Z1. Academic version. Digilent 240-114-1
Retired
No product available!
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Light-Blue
Retired
No product available!
Wireless motion sensor and magnetic field with built-in event memory (recorder)
Retired
No product available!
Premium Jumper Wire 50-Piece Rainbow Assortment F-F 3"
Retired
No product available!
No product available!
3D printer with automatic table levelling and print resume function. Equipped with a dual Z-axis and a filament sensor. It offers a large workspace of 300 x 300 x 400 mm and uses a Direct Drive extruder. Artillery Sidewinder X2
Retired
No product available!
Large format industrial 3D printer with touch display, heated table and USB, WiFi and Cloud support. The printer is fully assembled and ready to use. Flashforge Guider II
Retired
No product available!
Touchpanel for 128x64 M-series and CG-series displays, 67.5x47.8mm, ZIFF tape
Retired
No product available!
Set with 5 MP camera and 2 DOF control platform designed for Raspberry Pi minicomputers. The camera is equipped with an OV5647 sensor, equipped with an integrated IR filter. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0033PT