- Out-of-Stock
AVT613 B
ID: 193689
GUITAR AMPLIFIER - A KIT FOR INDEPENDENT INSTALLATION
GUITAR AMPLIFIER - A KIT FOR INDEPENDENT INSTALLATION
Producer: AVT
The AVT 613 Guitar Amplifier can perform two functions:
- work as a headphone amplifier for an electric guitar. This application is particularly helpful when learning to play and practice the instrument.
- work as a 'minipiec' guitar or a 10 W speaker amplifier (optional).
The perfect sound of the device is achieved thanks to the use of the high quality NE5532 operational amplifier. The system can be made in a stationary version (power from the network) or mobile (battery powered).
The kit is realized on the PW03 multifunction board, which should be purchased separately .
> The device is especially recommended for guitarists and lovers of good music
Selected parameters of the amplifier:
- versions: headphone or loudspeaker amplifier (after supplementing with a power amplifier)
- the possibility of using various integrated operational amplifiers
- maximum power of the furnace - 10 W
- power supply - 6-25 V
- possibility of battery or network supply
- set of elements and documentation included
Attention!!! The PW03 PCB should be purchased separately.
- Detailed description in
Download
193689
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
The AM receiver of the DCF77 signal with the MAS6180 system, allows to receive the frames of the synchronization signal from the time standard, using the carrier frequency of 77.5kHz. Thanks to this module, it is possible to create a clock with automatic date and time synchronization. The module has a ferrite antenna. modDCF77
Retired
No product available!
Module with Tegra X1 SoC system containing four 64-bit ARM Cortex A57 cores and a Maxwell graphic layout consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX1
Retired
No product available!
Arducam-F Rev.C+ Camera module shield with OV2640 for Arduino UNO MEGA2560 DUE. ArduCam B0051+B0011
Retired
No product available!
Arducam-LF Rev.C+ Camera module + 3.2 inch LCD for arduino UNO MEGA2560 DUE. ArduCam B0052+B0011
Retired
No product available!
Module designed for connecting more than one camera to a single CSI camera port on RPi board. One adapter board can connect 4 cameras and user can stack up max. 4 adapter boards that means up to 16 cameras on a single RPi board. ArduCAM B0069
Retired
No product available!
5mp 1080p OV5647 NoIR Camera Module with M12*0.5 Mount Lens for Raspberry Pi. ArduCam B0035
Retired
No product available!
OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi 3. ArduCam B0055
Retired
No product available!
Open source WIFI camera develop board based on Texas Instruments CC3200 SimpleLink WIFI IoT solution and Aptina MT9D111 camera module. ArduCAM B0073
Retired
No product available!
No product available!
Gravity: GPIO Shield for Arduino is an I / O port expander compatible with Arduino UNO. It allows to expand the capabilities of the base board by providing a total of 36 digital and analogue pins as well as UART and I2C interfaces. DFRobot DFR0334
Retired
No product available!
A highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi B+/2B/3B, uses i2S interface audio solution, supports 24-bit /192KHz high quality sound, compatible with other audio equipment via RCA lotus socket, includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly. DFR0449
Retired
No product available!
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
Retired
No product available!
No product available!
No product available!
No product available!
- The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan
Retired
No product available!
GUITAR AMPLIFIER - A KIT FOR INDEPENDENT INSTALLATION