- Out-of-Stock
AVT2500 C
ID: 193917
BASCOM 8051 BASE TEST TEST - STORE ASSEMBLED AND STARTED
BASCOM 8051 BASE TEST TEST - STORE ASSEMBLED AND STARTED
Producer: AVT
ABSOLUTE CHOICE AVT !!!
Kit necessary for all BASCOM College students. It is a test board containing all the most needed peripherals allowing for the construction and testing of many, many devices using a microprocessor programmed in the BASCOM environment. It enables learning and gradual learning of all programming ropes. The use of the uC 89CX051 emulator (kit AVT2501 ) allows even omitting the need to have the processor itself.
On the board there are output elements (eg transistor buffers), state display systems (eg LED diodes), additional memory, real-time clock and power supply. All activities related to assembly of prototype systems can be performed without the need for any soldering. Correctly prepared cables and connectors serve this purpose.
In addition to the programming set, it is worthwhile to purchase the AVT2501 emulator and the AVT2502 programmer. BASCOM 8051 is also available
The device is especially recommended for people who want to explore the secrets of microprocessor programming and constructing a lot of test systems
Selected parameters of the test plate:
- socket for processor 89CX051
- real-time clock, EEPROM memory
- LEDs and LED display
- alphanumeric LCD display
- receiver of data transmission in RC5 code
- I / O systems in the I2C and 1WIRE standard
- task buttons
- output buffers
- tile dimensions 115x95 mm
- power supply - 12 V (built-in stabilizer)
- assembled system
- Detailed description in EdW 3/00
Download
193917
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba
Retired
No product available!
Pre-installed Android4.4 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba. JEDEC/MMCA version 5.0:HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
Cooling Fan X is a cooling fan that can be used to cool any processor that works under heavy load. It can be mounted on the heat sink housing with 4 screws
Retired
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
Retired
No product available!
The cable allows connecting the ATMEL-ICE programmer to the commissioning set with any connector (operated by the programmer), through individual pin connectors
Retired
No product available!
1-channel monochrome system of adding subtitles on the image (OSD - On-Screen Display) with integrated EEPROM, TSSOP28, Maxim memory
Retired
No product available!
No product available!
The controller can control two brush motors, communicating with the master system using USB Micro-B, TTL serial interface, analog signals, as well as signals from the RC apparatus. The current capacity of 5A / channel allows you to control high-power motors. Polol 2394
Retired
No product available!
BASCOM 8051 BASE TEST TEST - STORE ASSEMBLED AND STARTED