- Out-of-Stock
![Pololu 1919 - 0.1" (2.54mm) Crimp Connector Housing: 1x12-Pin 5-Pack Pololu 1919 - 0.1" (2.54mm) Crimp Connector Housing: 1x12-Pin 5-Pack](https://kamami.pl/7972-large_default/pololu-1919-0-1-2-54mm-crimp-connector-housing-1x12-pin-5-pack.jpg)
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
These 1×12-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: it’s not easy to get the wires back out, so plan carefully!).
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other; you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy:
|
|
![]() |
![]() |
Pins | A (mm) | B (mm) |
---|---|---|
1×1 | – | 2.54 |
1×2 | 2.54 | 5.08 |
1×3 | 5.08 | 7.62 |
1×4 | 7.62 | 10.16 |
1×5 | 10.16 | 12.70 |
1×6 | 12.70 | 15.24 |
1×7 | 15.24 | 17.78 |
1×8 | 17.78 | 20.32 |
1×9 | 20.32 | 22.86 |
1×10 | 22.86 | 25.40 |
1×12 | 27.94 | 30.48 |
1×16 | 38.10 | 40.64 |
2×2 | 2.54 | 5.08 |
2×3 | 5.08 | 7.62 |
2×4 | 7.62 | 10.16 |
2×5 | 10.16 | 12.70 |
2×6 | 12.70 | 15.24 |
2×7 | 15.24 | 17.78 |
2×8 | 17.78 | 20.32 |
2×10 | 22.86 | 25.40 |
2×16 | 38.10 | 40.64 |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack |
ARM7TDMI, 256kB Flash (ISP), 64kB RAM, 1xUSB Device, 3xUART USART DBGU, ADC, LQFP64
No product available!
ROSA3D filament made of high-quality ASA polymer. 2.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Black
No product available!
No product available!
Computer Raspberry Pi, I2C, SPI, 8IO, UART, LCD interface, Joystick, 8 LED, RoHS
No product available!
No product available!
No product available!
LCD 2x16,80x36mm, LED backlight (red), FSTN NEGATIVE, second character set - cyryllic (v.E45-MIR-R-01), enhanced temperature range, "fast", 2-LED 40mA
No product available!
No product available!
No product available!
No product available!
Filament from ROSA3D made of high-quality PLA pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill PLA Starter Grey
No product available!
HDMI to CSI-2 bridge module based on TC358840 chip. It has a 22-pin FPC connector with a pitch of 0.5 mm and an audio connector. The input signal is supplied through the HDMI connector. Auvidea 70511
No product available!
No product available!
T1 (3mm) Yellow LED with Yellow Diffused Lens
No product available!
μHex is the first low-power controller which is compatible with Arduino. It is very suitable for the battery power supply environment. A 210mAh CR2032 cell battery could make it work 60 days long. DFR0343
No product available!
No product available!