- Out-of-Stock

This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated; they can be cut to length to match your application. The red and black wires are twisted together to reduce noise.
|
|
The connector is compatible with the power connectors on the Logomatic v2 serial SD datalogger and uLog 3-channel datalogger, with the red wire connecting to + and the black to -.
![]() |
For a 2-pin cable with a larger connector (2.5mm pitch) that will work with standard 0.1" headers, see our female JST XH-style cable.
You can use our male or female crimp pins and a 0.1" 2×1 crimp connector housing to make a connector for the unterminated end of the cable that is compatible with standard solderless breadboards and perfboards.
![]() |
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Right Angle |
![]() |
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Miniature starter board in the form of a USB plug compatible with Arduino (1.6.5 and newer), based on the ATtiny85 microcontroller. Up to 6 GPIO lines, up to 3 PWM lines, up to 4 ADC lines, SPI or I2C interface, and LED diode
No product available!
Precision microtip screwdriver from Velleman with a set of 19 interchangeable tips (flat, cross, torx, hex, ball, poses) made of chromium-molybdenum vanadium steel
No product available!
10/100 Ethernet transceiver with Media Independent Interface, 3.3V, TQFP64, RoHS
No product available!
No product available!
The 66.82 power relay with two changeover contacts with a load capacity of 30A, Faston 250 connections and safe circuit separation ensures high performance and compliance with safety standards. Finder 66.82.9.024.0000
No product available!
No product available!
Powerful Polol 3pi robot work. Line Follower mobile platform with two motors, 5 reflection sensors, LCD display, buzzer and three user buttons as well as mbed extension board with NXP LPC1768 module. Pololu 2153
No product available!
No product available!
No product available!
2in1 soldering station with hot air soldering iron and soldering tip. 700 W power station. Equipped with LCD display, button operated. YIHUA 992D
No product available!
HK Turnigy D3548 / 4 1100KV Brushless Outrunner Motor (18233)
No product available!
No product available!
The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. 410-328
No product available!
No product available!
No product available!
No product available!