- Out-of-Stock
6x1 F-F 12" Cable for ShiftBrites and ShiftBars
These 12" (30 cm), six-conductor cables can be used to chain together ShiftBrite or ShiftBar modules. The cable wires are colored to match the ShiftBrite pin-out, with black for ground and red for power. The cable is composed of stranded 26 AWG wires and has female 0.1" 6×1 connectors on both ends.
This cable can serve as a generic, 6-conductor ribon cable with 6×1 0.1" female connectors on both ends, but it is designed for chaining ShiftBrites or ShiftBars together to achieve displays such as those shown in the video at the bottom of this page. The cable wires are 26 AWG with stranded conductors.
The cables are available in three lengths:
![]() |
![]() |
| Three ShiftBrites chained together. |
|---|
![]() |
6x1 F-F 6" Cable for ShiftBrites and ShiftBars |
![]() |
6x1 F-F 24" Cable for ShiftBrites and ShiftBars |
![]() |
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight |
Manufacturer
Responsible person
Female-female connection cable, 6-core, 64 cm long, in various colors. The cable from two sides is terminated with a 6x1 female goldpin connector in 2.54 mm pitch. CAB_F-F-6x1 (Rainbow-1-64)
High quality XF-ABS filament for 3D printer with 3 mm diameter. 2 kg of wire are wound on the spool.
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 2 kg of wire are wound on the spool.
No product available!
No product available!
Orange Pi is a computer with Allwinner A20 processor, 1 GB RAM, 1 Gb Ethernet. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x13 connector compatible with Raspberry Pi and a micro-SD card slot. The computer is equipped with a SATA interface.
No product available!
Orange Pi Mini 2 is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 100 Mb Ethernet. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot.
No product available!
Orange Pi 2 is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 100 Mb Ethernet, WiFi 802.11 b / g / n. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot.
No product available!
Orange Pi PC H3 Quad-core Learning Development Board Mali400MP2 GPU 1GB DDR3
No product available!
Orange Pi Plus is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 1 Gb Ethernet, WiFi 802.11 b / g / n. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot, 8GB EMMC Flash
No product available!
Development kit with TLV493D sensor. The board has a built-in J-Link programmer, XMC1100 microcontroller (Cortex-M0, 64kB Flash memory, 16kB RAM) and a three-plane magnetic field sensor TL493D. TLV493D-A1B6 2 GO KIT
No product available!
Arduino. 36 projects for electronics enthusiasts; Simon Monk
No product available!
No product available!
Development board with 32-bit Intel® Quark ™ X1000 (400MHz) SoC and 256MB DDR3 memory. Features include compatible with Arduino UNO R3, built-in mini-PCI Express connector or Ethernet with PoE support. GALILEO2.P
No product available!
Acrylic computer case for Orange Pi PC / PC Plus / PC 2, transparent. Orange Pi
No product available!
The enclosure allows you to place a Raspberry PI B + / 2 computer and a 7 "touch screen in it, thus creating a compact design that can act as a tablet, presentation screen or operator panel. CBRPP-TS-BLK / WHT
No product available!
No product available!
6x1 F-F 12" Cable for ShiftBrites and ShiftBars