- Out-of-Stock
![Pololu 2139 - GWS S125 1/2T 2BB Sail Winch Servo Pololu 2139 - GWS S125 1/2T 2BB Sail Winch Servo](https://kamami.pl/8598-large_default/pololu-2139---gws-s125-12t-2bb-sail-winch-servo.jpg)
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The GWS S125 1/2T 2BB Sail Winch Servo is a unique servo that has a wider rotation range than typical hobby servos. It rotates 180° over the standard 1-2 ms servo pulse range output by many RC receivers (typical hobby servos turn 90° over this pulse range), and it is capable of approximately 1.5 full turns when used with a wider pulse range.
The GWS Sail Winch servos are commonly used for radio control sail boats, but they are useful for any application where you want easy, inexpensive position control over more than 180°. We carry the 1/2 turn and 1 turn versions, which rotate 180° and 360°, respectively, when provided with the standard 1-2 ms servo pulse range output by many RC receivers. Sending a wider range of control pulses allows the 1/2T servo to achieve approximately 1.5 rotations and the 1T servo to achieve approximately 3 rotations.
These servos do not have physical end stops, so commanding them past their limits will cause them to rotate continuously until you change the commanded position back to something within its actual range. In our tests, this did not damage the servo, but we strongly recommend against it as there is no guarantee this will not damage the servo’s feedback potentiometer.
The sail winch servos feature two ball bearings for improved performance, and they include a specialized servo horn that can be used as a winch. The 27 cm servo cable is terminated with either a female JR connector or a female Futaba connector. The Futaba connector has an extra polarizing tab that can be shaved off to make it compatible with male JR connectors.
|
|
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Yellow
No product available!
No product available!
No product available!
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Candy
No product available!
Audio cable with 3.5 mm 3-pin minijack and 2x RCA (chinch), 1,5 m length. GEMBIRD CCA-458
No product available!
No product available!
No product available!
WRL-10663 OSHW - Evaluation Board for Si4703 FM Tuner
No product available!
No product available!
PCB with a programmed layout for an animated 3D LED bomb controlled by an IR remote control. AVT1986 A +
No product available!
No product available!
No product available!
No product available!
No product available!