- Out-of-Stock
![Pololu 1105 - 67:1 Metal Gearmotor 37Dx54L mm Pololu 1105 - 67:1 Metal Gearmotor 37Dx54L mm](https://kamami.pl/8758-large_default/pololu-1105---671-metal-gearmotor-37dx54l-mm.jpg)
67:1 Metal Gearmotor 37Dx54L mm
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
67:1 Metal Gearmotor 37Dx54L mm
This 2.13" x 1.45" x 1.45" gearmotor is a powerful brushed DC motor with 67:1 metal gearbox intended for operation at 12 V. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.
Key specs at 12 V: 150 RPM and 300 mA free-run, 200 oz-in (14 kg-cm) and 5 A stall.
This powerful brushed DC gearmotor is available in six different gear ratios. A version with an integrated encoder is also available.
Gear Ratio | Speed @ 12V | Stall Torque @ 12V | Stall Current @ 12V | ![]() With Encoder | ![]() Without Encoder |
---|---|---|---|---|---|
19:1 | 500 RPM | 84 oz-in | 5 A | 37Dx52L mm | 37Dx52L mm |
29:1 | 350 RPM | 110 oz-in | 5 A | 37Dx52L mm | 37Dx52L mm |
50:1 | 200 RPM | 170 oz-in | 5 A | 37Dx54L mm | 37Dx54L mm |
67:1 | 150 RPM | 200 oz-in | 5 A | 37Dx54L mm | 37Dx54L mm |
100:1 | 100 RPM | 220 oz-in | 5 A | 37Dx57L mm | 37Dx57L mm |
131:1 | 80 RPM | 250 oz-in | 5 A | 37Dx57L mm | 37Dx57L mm |
These motors are intended for use at 12 V, though the motor can begin rotating at voltages as low as 1 V.
The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart. You can use our custom 37D metal gearmotor bracket (shown in the left picture below) to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.
|
|
Please note that unlike our smaller metal gearmotors, these 37D mm gearmotors have output shafts with a diameter of 6 mm. The Pololu universal aluminum mounting hub for 6mm shafts can be used to mount our larger Pololu wheels (80mm- and 90mm-diameter) or custom wheels and mechanisms to the gearmotor’s output shaft (see the right picture above).
The picture below shows the dimensions (in mm) of the 37D mm line of gearmotors. The value of X
is 22 mm for the 19:1 37Dx52L mm and 29:1 37Dx52L mm versions, 24 mm for the 50:1 37Dx54L mm and 67:1 37Dx54L mm versions, and 26.5 mm for the 100:1 37Dx57L mm and 131:1 37Dx57L mm versions.
![]() |
37D mm metal gearmotor dimensions (units in mm). |
---|
Warning: Do not screw too far into the mounting holes as the screws can hit the gears. We recommend screwing no further than 3mm (1/8") into the screw hole.
The operational specs listed in the table below were measured at 6 V. At 12 V, the no-load RPM, stall current, and stall torque will all be approximately twice their 6V values. To see the motor specs for 12V operation, please see the short description at the top of this page or this product’s specification tab.
![]() |
37D mm metal gearmotor next to a micro metal gearmotor for size comparison. |
---|
We offer a wide selection of metal gearmotors that offer different combinations of speed and torque. Our metal gearmotor comparison table can help you find the motor that best meets your project’s requirements.
![]() |
Some of the Pololu metal gearmotors. |
---|
![]() |
Pololu 37D mm Metal Gearmotor Bracket Pair |
![]() |
Pololu Universal Aluminum Mounting Hub for 6mm Shaft Pair, 4-40 Holes |
![]() |
Pololu Simple Motor Controller 18v7 (Fully Assembled) |
No product available!
Development kit with MSP430F1122IDW microcontroller
No product available!
Neodymium rectangular magnet with dimensions of 20x4mm a and a height of 2 mm.
No product available!
FiberFlex 40D filament in Black with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy FiberFlex 40D Black
No product available!
No product available!
No product available!
RADIODIMMER MASTER - LIGHTING CONTROLLER IN A FLAT - PCB PLOT AND PROGRAMMED LAYOUT
No product available!
Male terminal block, straight, 8-pin. 3.5 mm pitch. Height 9.2 mm. GOLTEN 15EGTVC-3.5-08P-14-00AH
No product available!
No product available!
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
No product available!
No product available!
No product available!
No product available!
Alphanumeric display OLED 4x20, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH002004AB
No product available!
No product available!
No product available!
67:1 Metal Gearmotor 37Dx54L mm