- Out-of-Stock
Pololu 42x19mm Wheel and Encoder Set
This set includes a pair of 42×19mm wheels, a pair of extended brackets, and two matching encoders. Just pick a pair of micro metal gearmotors to complete your feedback-enabled drive system.
This set is intended for those looking to create a differential-drive robot with dual quadrature encoders. Just add two micro metal gearmotors of your choosing (sold separately), a mounting platform such as a RRC04A 5" robot chassis, and a robot controller such as an Orangutan SVP-324 (which features inputs for two quadrature encoders) to create a robot capable of closed-loop speed and position control.
This set consists of:
|
|
|
Note: This set is designed to work with our 5:1 to 298:1 micro metal gearmotors. Motors are not included and must be purchased separately. This encoder will not work with the 1000:1 gear ratio version of our micro metal gearmotors due to the longer gearbox.
For a larger motor with a higher-resolution, integrated quadrature encoder, see our 37D mm metal gearmotor with 64 CPR encoder.
![]() |
Pololu Ball Caster with 3/8" Metal Ball |
![]() |
TB6612FNG Dual Motor Driver Carrier |
![]() |
Pololu 5" Robot Chassis RRC04A Solid Black |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gold Metallic
No product available!
A pin expander designed for Raspberry Pi boards. It is equipped with a standard 40-pin connector for connecting a minicomputer and five sets of 2x20-pin outputs for connecting expansion modules. Pimoroni PIM321
No product available!
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
No product available!
Neodymium rectangular magnet with dimensions of 3x3mm a and a height of 3 mm.
No product available!
Shielded FTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCF5-10CC-0150-G
No product available!
Cable with a length of 150 mm, on one side terminated with a Qwiic connector, and on the other side with single female goldpin connectors. It allows you to connect Qwiic modules, e.g. with development board. SparkFun CAB-14988
No product available!
No product available!
No product available!
No product available!
MYIR MYIR MYS-7Z010-LC is a set of elements with a single board computer based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) system. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
No product available!
2.5 mm JST XH-Style Shrouded Male Connector: 2-Pin, Straight
No product available!
A universal IR remote designed for NanoPi M1, powered by two AAA batteries. FriendlyELEC RC-100
No product available!
Shield with MEMS sensors: accelerometer, gyroscope, magnetometer, pressure, humidity and temperature sensor. Shield is designed to work with plates from the STM32 Nucleo family (connector in accordance with the Arduino UNO R3 standard). Sensors use I2C interface for communication. STMicroelectronics X-NUCLEO-IKS01A3
No product available!
No product available!
Pololu 42x19mm Wheel and Encoder Set