- Out-of-Stock
The system is used to inform that a person being under the care of a "radio guard" has left the area intended for it. The set is used during the care of the elderly, the sick (eg with memory loss) and children. It consists of two main cooperating elements - a transmitter and a receiver. Both have small dimensions so that you can carry them in your pocket.
The operation of the set is simple, - from time to time the transmitter sends a corresponding, encoded signal to the receiver. If this one is in range, after receiving the signal, it sends a feedback signal confirming the reception. In this way, the transmitter "knows" whether the other part is in a specific area or already outside it. In the latter case, the alarm signaling is activated.
The radio track uses ready-made, factory-tuned modules - complete low power transceivers. They have been supplemented with processors that perform all control and control functions.
The device is particularly recommended when it is necessary to supervise the presence of selected persons
Selected parameters:
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
ARK terminal connector spring 12-pin, pitch 2.5 mm, non-detachable.
No product available!
ARK terminal connector spring 4-pin, pitch 5.00 mm, non-detachable
No product available!
Minicomputer with built-in NVIDIA Jetson Nano module with 4 GB RAM. In an aluminum housing, it has the JetPack installed. Seeed Studio 110061361
No product available!
ADS-B antenna made of fiberglass working at 1090 MHz with 8.5dB amplification). 1.2 m long. Pimoroni COM-B3301
No product available!
Switch with relay for installation in a socket. It offers the ability to control one device with an operating current of up to 16 A and voltage from 110 to 240V AC or from 24 to 30V DC. Shelly Plus 1PM
No product available!
A set dedicated to control BLDC motors. It consists of the X-NUCLEO-IHM07M1 module with the L6230 controller, the NUCLEO-F302R8 development board, and the BLDC motor and power supply. STMicroelectronics P-NUCLEO-IHM002
No product available!
A miniature linear actuator that has a stroke range of up to 30 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
No product available!
A miniature linear actuator that has a stroke range of up to 80 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
No product available!
A miniature linear actuator that has a stroke range of up to 100 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
No product available!
A mini welding machine designed to connect 18650 type battery cells
No product available!
Module with USB 3.0 interface dedicated to ArduCAM cameras. Supports sensors with MIPI and DVP interface. ArduCAM B0317
No product available!
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
No product available!
360° laser scanner. It performs measurements with a frequency of 6 revolutions per second and has a range of up to 8 m. Waveshare Triangulation LiDAR LD14
No product available!
ROSA3D filament made of high-quality polycarbonate with polybutylene terephthalate. 0.5 kg of 1.75 mm filament is wound on the spool. ROSA3D PC-PBT Black
No product available!
ROSA3D filament made of high-quality polycarbonate with polybutylene terephthalate. 1 kg of 1.75 mm filament is wound on the spool. ROSA3D PC-PBT Black
No product available!
ROSA3D filament made of high-quality, recycled PLA. 3 kg of 1.75 mm filament is wound on the spool. ROSA3D R-PLA Black
No product available!