- Out-of-Stock
AVT5378 B
ID: 208663
VARIOUS MEASURING PROBE WITH GALVANIC INSULATION - SELF-ASSEMBLY KIT
VARIOUS MEASURING PROBE WITH GALVANIC INSULATION - SELF-ASSEMBLY KIT
Producer: AVT
Producer: AVT
By using a differential measuring probe, only the signal controlling the gates of the MOSFET transistors is fed to the oscilloscope input. At the same time, you can observe waveforms on different potentials (low-side and high-side), and thanks to galvanic isolation you do not need to use a transformer on the power supply.
Recommendations: a practical, inexpensive solution for the measuring probe, which will be useful for all designers dealing with devices for power electronics.
Basic information:
- input voltage: -20V ... + 20V
- input impedance: 1 MV / ~ 10 pF
- measuring band: DC ... 134 kHz (drop 0.5 dB) ... 633 kHz (drop 3dB)
- delay of the rising / falling edge: about 500 ns / ok. 500 ns
- processing factor: approx. 200: 1 (10V -> 50mV)
- maximum input voltage:? 100 V
- power supply: 4 R6 (AA) batteries
- power consumption: 19mA (input circuit), 200mA (output circuit)
- in the set a printed circuit board, a set of elements and documentation
A detailed description in EP1 / 13 or 
208663
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
No product available!
No product available!
It is a USB3.0 adapter for SATA3 HDD / SSD compatible with Odroid XU4, U3 and X2. Equipped with the ASM1051E ASMedia system. The set includes a 12 V / 2 A power supply and a USB3.0 cable. Manufacturer's name: USB3.0 to SATA3 HDD / SSD interface kit
Retired
No product available!
No product available!
16Kbit, 2-Wire Bus Serial EEPROM with full memory Write Protect, ATM, DIP08, RoHS
Retired
No product available!
No product available!
A small motor with a plastic gear 120:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1124
Retired
No product available!
No product available!
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Blue Sky Transparent
Retired
No product available!
The switch module has a relay with a control function via a WiFi network. It can be connected to a WiFi network or act as a stand-alone access point. Shelly 1 Open Source
Retired
No product available!
PCB board for power amplifier module with LM3886. AVT1922 A
Retired
No product available!
No product available!
No product available!
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
Retired
No product available!
No product available!
VARIOUS MEASURING PROBE WITH GALVANIC INSULATION - SELF-ASSEMBLY KIT